1040,31 € incl. IVA
Udad
Propiedades
Position drive dimensions 480
Flange drilling screen F1012
Swivel angle [deg] 90
Adjustable range end position at 0° [deg] -5 to 5
Adjustable range end position at 90° [deg] -5 to 5
Shaft connection Depth [mm] 29
Standard connection to fitting ISO 5211
installation position arbitrary
Principle of operation single action
Construction set up Toothed rack/pinion
Closing direction Right closing
Valve connection corresponds to standard VDI/VDE 3845 (NAMUR)
Connection for position controllers and position feedback signal comply with standard VDI/VDE 3845 Size AA 2
Safety Integrity Level (SIL) Produkt kann eingesetzt werden in SRP/CS bis SIL 2 High Demand
Operating pressure [bar] 2 to 8
Nominal operating pressure [bar] 6,0
CE certificate (see declaration of conformity) to EU EX protection directive (ATEX)
Certified awarding point TÜV Rhineland
ATEX gas category II 2G
ATEX dust category II 2D
Ex ignition protection type gas Ex h IIC T4 Gb X
Ex ignition protection type dust Ex h IIIC T105°C Db X
Ex ambient temperature -20°C <= Ta <= +80°C
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Information about operating and control medium Oiled operation possible (required in further operations),
Pressure dew point 10°C under ambient and medium temperature
Bearing temperature [°C] -20 to 60
ambient temperature [°C] -20 to 80
Rotary torque for nominal operating pressure and 0° pivot angle [Nm] 347,1
Rotary torque for nominal operating pressure and 90° pivot angle [Nm] 181,0
Information about torque The operating torque of the actuator may not be higher than the maximum permitted torque listed in ISO 5211, related to the size of the fastening flange and the coupling.
Air consumption a 6 bar per cycle 0°-90°-0° [LTR] 17,2
Product weight [g] 18.485
Shaft connection T27
Pneumatic connection G1/4
Material information RoHs compliant
Connection plate material Aluminium wrought alloy, anodised
Cover material Alu-Druckguss, beschichtet
Seals material NBR
Housing material Aluminium wrought alloy, anodised
Piston material Aluminium die casting
Bearing material POM
Lug material Steel
Screws material High-alloyed stainless steels
Shaft material High-alloyed stainless steels
Spring force torque at a swivel angle 0° [Nm] 170,0
Spring force torque at 90° [Nm] 336,1
Spring material spring steel
Más información sobre OT-FESTO070645
Peso 18.485 g / Udad
GTIN 4052568288181
Código aduanero 84123900
Fabricante Festo
documentos

 
¡Todas las indicaciones se entienden como valores de referencia no vinculantes! No asumimos ninguna responsabilidad por la elección de datos no confirmada por escrito. Las indicaciones de presión se refieren, salvo indicación en contrario, a líquidos del grupo II a +20°C
Entrega inmediata
Medios de pago:

Apellido

Factura

Servicio de pedidos tardíos
todavía 176 Min.

Si Ud. hace el pedido en línea de lunes a jueves de 16:30 a 21:00 hs o los viernes de 16:30 a 18:00 hs, si lo desea le enviamos su pedido el mismo día por GLS (tarifa: 5%, min. 10,00 €).