Skupina artiklov

T-connectors with plug nipple, PVDF

Materials:

Type stainless steel: Body and release ring: 1.4401, seals FKM, green (FDA 21 CFR 177.2600), Holding claws: Stainless steel 1.4310, Lubricant: Silicone grease (NSF / ANSI 51 & 61)

Type PVDF: body and release ring: PVDF, threaded part: Stainless steel 1.4401, gaskets: FKM, green (FDA 21 CFR 177.2600), retaining claws: Stainless steel 1.4310, lubricant: Silicone grease (NSF / ANSI 51 & 61)

Temperature range:

Type stainless steel: -20 °C to +200 °C (Ø 16: -15°C to +190°C)

Type PVDF: -20 °C to +120 °C

Operating pressure:

Type stainless steel: -0.95 to 20 bar

Type PVDF: Ø 4 - 6 mm: -0.95 to 20 bar (+20 °C), -0.95 to 10 bar (+100 °C), -0.95 to 3 bar (+120 °C), Ø 8 mm: -0.95 to 20 bar (+20 °C), -0.95 to 8 bar (+100 °C), -0.95 to 3 bar (+120 °C), Ø 10 - 12 mm: -0.95 to 12 bar (+20 °C), -0.95 to 6 bar (+100 °C), -0.95 to 3 bar (+120 °C)

Media:

oiled and unoiled compressed air, non-hazardous gasses and liquids

Advantages:

•Available with conical thread or with cylindrical thread with chambered O-ring,
•Gaskets and lubricants with approval according to FDA or NSF/ANSI,
type PVDF: lighter and cheaper than push-in fittings made of stainless steel with simultaneous high chemical resistance,
type PVDF: transparent body allows visibility of the medium inside the connector

Dokumenti:

Več informacij Manj podatkov
T-connectors with plug nipple, PVDF:
5 od 5 izdelkov
Takoj dobavljivo
Takoj dobavljivo
Takoj dobavljivo
Takoj dobavljivo
Takoj dobavljivo
Vse navedbe podatkov so nezavezujoče orientacijske vrednosti! Za izbiro podatkov, za katere ne izdamo pisnega potrdila, ne prevzemamo jamstev. Navedbe tlaka, v kolikor ni navedeno drugače, se nanašajo na tekočine skupine II. pri +20°C.
Možnosti plačila:

Po povzetju

Račun