Data sheet

2/2-way solenoid valve G 1-1/2", normally closed (NC),12 V DC Eco
Item number:
SLP 112 ES 12V=
Example illustration
Item description
Materials:
Bodies: 1.4408, internal parts: stainless steel, seal: FKM
Temperature range:
-20°C to +120°C, ambience: max. +65 °C
Media:
Compressed air, neutral gases, water, neutral low-viscosity media, other media on request
Installation position:
With upright magnets
Control voltages:
Standard: 24 V DC, 230 V AC, upon request other voltages
Voltage tolerance:
± 10 %
Protection class:
IP 65
Structural shape solenoid coil:
P (plug size 3)
Information:
These valves are always supplied with a solenoid coil and a connector plug.
Warning:
For opening or closing, servo-controlled valves require a pressure difference between the valve inlet and valve outlet. The pressure difference is given as minimum pressure. There is a pressure compensation in the valve, resulting that no or little medium is used at the valve outlet, the valve will no longer function (it opens or closes unreliably).
Properties
Ver­sion 2/2-way so­le­noid valve
Con­trol volt­age 12 V DC
func­tion nor­mally closed (NC)
Thread G 1-1/2"
Op­er­at­ing pres­sure [bar] 0,5 - 16
DN [mm] 40
L [mm] 131
Kv value* [l/min] 427
Power con­sump­tion (DC) [W] 13
Struc­tural shape so­le­noid coil P
Spare so­le­noid coil MAG P 12V=
Spare mem­brane NBR SLP 114112 MEM N
Spare mem­brane FKM SLP 114112 MEM V
Spare mem­brane EPDM SLP 114112 MEM EP
Further information:
Weight 2,4 kg / pcs
GTIN 4050571631185
Customs duty number 84812090
RoHS compliant Yes
Manufacturer EMC
More information on this item and the process for ordering it can be found in our online shop https://www.landefeld.com under item number SLP 112 ES 12V=.
Landefeld Druckluft und Hydraulik GmbH · Konrad-Zuse-Straße 1 · 34123 Kassel · Germany
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
As of: 28.03.2025