Pressure gauge shut-off valve G 1/2" Vrtljive objemke - zatici z rocajem za nosilce za merilnike,Med
Št. Izdelka:
MAV 12 SMZM MS
Opis artikla
Application:
Pressure gauge shut-off valves are used to protect pressure gauges against spikes in pressure and vibrations. Setting the valve to throttle can cushion spikes in pressure and vibrations, and separate the gauge from the supply line completely. A bleed screw can be used to release pressure from the gauge. Otherwise, no pressure is released from the gauge while the valve is closed. For low pressures and non-aggressive substances, we recommend using pressure gauge stop cocks.
Materials:
Seals: PTFE, hand wheel: plastic
Temperature range:
-10 do +120 °C, higher temperatures with reduced pressures possible
Pressure gauge shut-off valves are used to protect pressure gauges against spikes in pressure and vibrations. Setting the valve to throttle can cushion spikes in pressure and vibrations, and separate the gauge from the supply line completely. A bleed screw can be used to release pressure from the gauge. Otherwise, no pressure is released from the gauge while the valve is closed. For low pressures and non-aggressive substances, we recommend using pressure gauge stop cocks.
Materials:
Seals: PTFE, hand wheel: plastic
Temperature range:
-10 do +120 °C, higher temperatures with reduced pressures possible
Lastnosti
| Material | Medenina |
| Izvedba | Vrtljive objemke - zatiči z ročajem za nosilce za merilnike** |
| Priključek merilne naprave (notranji navoj) | G 1/2" |
| Vhodni tlak | G 1/2" (AG) |
| Preskusni priključek | nič |
| PN | 250 |
| Norma | DIN 16270 B |
Dodatne informacije o MAV12SMZMMS
| Teža | 650 g / Kos |
| GTIN | 4050571480325 |
| Številka carinskega blaga | 84818079 |
| Skladno z RoHS | Da |
| Proizvajalec | WIKA (WEEE DE92770372) |
Dokumenti
- Catalogue page Atlas 9 (Page 674) (PDF)
- Dokumentacijo (PDF)
- Podatkovni list (Pogled za tiskanje)
- Podatkovni list (angleščina) (Pogled za tiskanje)
*The clamping socket is equipped with a left-hand and right-hand thread and allows the measuring device to be positioned freely. It functions similarly to a union nut with a flat seal. The clamping socket is available in steel for brass valves according to DIN. The pressure gauge gasket must be ordered separately, **male thread with centring pin for profiled seal
Vse navedbe podatkov so nezavezujoče orientacijske vrednosti! Za izbiro podatkov, za katere ne izdamo pisnega potrdila, ne prevzemamo jamstev. Navedbe tlaka, v kolikor ni navedeno drugače, se nanašajo na tekočine skupine II. pri +20°C.
Pribor
Možnosti plačila: