{{ $t('shop.all.spaetbestellservice.hinweis') }}
Nominal width laval nozzle [mm] | 2,00 |
Pitch dimension [mm] | 20 |
Construction type silencer type | open |
installation position | arbitrary |
Ejector characteristic |
High vacuum, Standard |
Filter porosity [µm] | 40 |
Hand assist actuation | tentative |
Integrated function |
check valves, Silencer open, vacuum switch, Electrical switch on valve, Ejection impulse electrical, flow control valve (both directions), filter |
Construction set up | Modular |
Short circuit resistance | yes |
Measured parameter | Relative pressure |
Measurement principle | Piezoresistive |
Switching element function | NO contact |
Switch function |
Threshold comparator, Threshold value with fixed hysteresis |
Valve function | closed |
Reverse polarity protection | for all electrical connections |
Control input to standard | IEC 61131-2 |
Display type | LED |
Setting options | Teach-in |
Switching position display | LED |
Switching status indicator | Visual |
Settings range threshold value [bar] | -1 |
Operating pressure [bar] | 2 to 8 |
Operating pressure for max. vacuum [bar] | 5,3 |
max. vacuum [%] | 93 |
Nominal operating pressure [bar] | 6 |
Max. suction volume current against atmosphere [l/min] | 86,5 |
Venting time for nominal operating pressure [s] | 0,2 |
Operating voltage range DC [V] | 20.4 to 27.6 |
Power-on time | 100 % |
Inductive protection circuit | adjusted to MZ, MY, ME coils |
Insulation voltage [V] | 50 |
Empty run current [mA] | < 80 mA |
Max. output current [mA] | 100 |
Residual current [mA] | 0,1 |
Control output | PNP |
Voltage drop [V] | <= 1,5 V |
Coil characteristic value | 24 V DC: Low current phase 0.3 W, high current phase 2,55 W |
Surge voltage strength [kV] | 0,8 |
Overload resistant | Available |
Degree of contamination | 3 |
Permission |
RCM mark, c UL us - Listed (OL) |
KC-mark | KC-EMV |
CE certificate (see declaration of conformity) | to EU EMC directive |
Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
Information about operating and control medium | Oiled operation not possible |
Corrosion resistant class KBK | 2 - moderate corrosion stress |
Medium temperature [°C] | 0 to 50 |
Relative humidity | 5 - 85 % |
Noise level for nominal operating pressure [dB(A)] | 74 |
Protection category | IP65 |
Protection class | III |
ambient temperature [°C] | 0 to 50 |
Max. tightening torque |
0.8 Nm with female thread, 2.5 Nm with throughway bore |
Product weight [g] | 415 |
Pressure measurement range [bar] | -1 |
Accuracy FS [%FS] | 0,5 |
Reproducibility shifting time FS [%] | 0,6 |
Switching logic inputs | PNP (Positive switching) |
Electrical connection |
M12x1, 5 pin, Plug |
Fastening type |
With throughway bores, With female thread, With Accessories |
Pneumatic connection 1 | G1/4 |
Pneumatic connection 3 | Silencer integrated |
vacuum connection | QS-8 |
Material information |
LABS containing materials included, RoHs compliant |
Seals material | NBR |
Capture nozzle material | POM |
Filter material |
PA, Web, Sintered steel |
Filter housing material | PA reinforced |
Housing material |
Aluminium die casting, PA reinforced |
Regulation screw material | Steel |
Silencer material |
Aluminium wrought alloy, PU foam |
Screws material | Steel |
Plug housing material | brass, nickel-plated |
Plug contacts material | brass, Gold plated |
Pins material | Steel |
Jet nozzle material | Aluminium wrought alloy |
Button field material | PA reinforced |
Screw connection material | brass, nickel-plated |
Hysteresis [bar] | 0,02 |
Banjo bolt material | Aluminium wrought alloy |
Elbow material | Stainless steel |
{{ $t('shop.all.gewicht') }} | 415 g / Pièce |
{{ $t('shop.all.gtin') }} | 4052568258528 |
{{ $t('shop.display.artikel.zollwarennummer') }} | 84141089 |
{{ $t('shop.all.hersteller') }} | Festo |
{{ $t('shop.all.spaetbestellservice.hinweis') }}
{{ $t('shop.all.wochenendversand.hinweis') }}
Une erreur s'est produite. Veuillez recharger la page et réessayer.