{{ $t('shop.all.spaetbestellservice.hinweis') }}
Nominal width laval nozzle [mm] | 0,70 |
Pitch dimension [mm] | 20 |
Construction type silencer type | open |
installation position | arbitrary |
Ejector characteristic |
High vacuum, Standard |
Filter porosity [µm] | 40 |
Hand assist actuation |
tentative, Additional via operating buttons |
Integrated function |
check valves, Silencer open, vacuum switch, Electrical switch on valve, Ejection impulse electrical, flow control valve (both directions), filter, Air-saving function electrical |
Construction set up | Modular |
Short circuit resistance | yes |
Measured parameter | Relative pressure |
Measurement principle | Piezoresistive |
Switching element function |
NC contact, NO contact |
Switch function |
Window comparator, Threshold comparator |
Valve function | open |
Reverse polarity protection | for all electrical connections |
Control input to standard | IEC 61131-2 |
Display type |
Backlit LCD, 4 digit alphanumeric |
Display range [bar] [bar] | -0,999 |
Presentable unit(s) | bar |
Settings range hysteresis [bar] [bar] | -0,9 |
Setting options | Via display and buttons |
Switching position display | LCD |
Switching status indicator | Visual |
Settings range threshold value [bar] | -0,999 |
Operating pressure [bar] | 2 to 8 |
Operating pressure for max. vacuum [bar] | 4,1 |
max. vacuum [%] | 93 |
Nominal operating pressure [bar] | 6 |
Max. suction volume current against atmosphere [l/min] | 16,0 |
Venting time for nominal operating pressure [s] | 0,4 |
Operating voltage range DC [V] | 20.4 to 27.6 |
Power-on time | 100 % |
Inductive protection circuit | adjusted to MZ, MY, ME coils |
Insulation voltage [V] | 50 |
Empty run current [mA] | < 70 mA |
Max. output current [mA] | 100 |
Residual current [mA] | 0,1 |
Control output | 2xNPN |
Voltage drop [V] | <= 1,5 V |
Coil characteristic value | 24 V DC: Low current phase 0.3 W, high current phase 2,55 W |
Surge voltage strength [kV] | 0,8 |
Overload resistant | Available |
Degree of contamination | 3 |
Permission |
RCM mark, c UL us - Listed (OL) |
KC-mark | KC-EMV |
CE certificate (see declaration of conformity) | to EU EMC directive |
Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
Information about operating and control medium | Oiled operation not possible |
Corrosion resistant class KBK | 2 - moderate corrosion stress |
Medium temperature [°C] | 0 to 50 |
Relative humidity | 5 - 85 % |
Noise level for nominal operating pressure [dB(A)] | 58 |
Protection category | IP65 |
Protection class | III |
ambient temperature [°C] | 0 to 50 |
Max. tightening torque |
0.8 Nm with female thread, 2.5 Nm with throughway bore |
Product weight [g] | 330 |
Pressure measurement range [bar] | -1 |
Accuracy FS [%FS] | 3,0 |
Reproducibility shifting time FS [%] | 0,6 |
Switching logic inputs | NPN (minus-switching) |
Electrical connection |
M12x1, 5 pin, Plug |
Fastening type |
With throughway bores, With female thread, With Accessories |
Pneumatic connection 1 | QS-8 |
Pneumatic connection 3 | Silencer integrated |
vacuum connection | QS-8 |
Material information |
LABS containing materials included, RoHs compliant |
Seals material | NBR |
Capture nozzle material | POM |
Filter material |
PA, Web, Sintered steel |
Filter housing material | PA reinforced |
Housing material |
Aluminium die casting, PA reinforced |
Regulation screw material | Steel |
Silencer material |
Aluminium wrought alloy, PU foam |
Screws material | Steel |
Window material | PA |
Plug housing material | brass, nickel-plated |
Plug contacts material | brass, Gold plated |
Pins material | Steel |
Jet nozzle material | Aluminium wrought alloy |
Button field material | TPE-U |
Screw connection material | brass, nickel-plated |
{{ $t('shop.all.gewicht') }} | 330 g / Udad |
{{ $t('shop.all.gtin') }} | 4052568178116 |
{{ $t('shop.display.artikel.zollwarennummer') }} | 84141089 |
{{ $t('shop.all.hersteller') }} | Festo |
{{ $t('shop.all.spaetbestellservice.hinweis') }}
{{ $t('shop.all.wochenendversand.hinweis') }}
Se produjo un error, vuelva a cargar la página e inténtelo nuevamente.