Item description
Description:
3-piece manual tap set (fine thread 2-piece), comprising pre-cutter, centre tap and finishing tap for metric threads in accordance with DIN ISO 13. Flanks relief ground, tolerance in accordance with ISO 2 / 6H, gate cut: 2 - 3 turns.
Quality:
HSS-G:
Use for steel, cast steel alloys and non-alloys (<800 N/mm² tensile strength), grey-, malleable-, ductile-, cast and sintered iron, nickel silver, graphite and short cutting aluminium alloys, brass and bronze.
3-piece manual tap set (fine thread 2-piece), comprising pre-cutter, centre tap and finishing tap for metric threads in accordance with DIN ISO 13. Flanks relief ground, tolerance in accordance with ISO 2 / 6H, gate cut: 2 - 3 turns.
Quality:
HSS-G:
Use for steel, cast steel alloys and non-alloys (<800 N/mm² tensile strength), grey-, malleable-, ductile-, cast and sintered iron, nickel silver, graphite and short cutting aluminium alloys, brass and bronze.
Properties
| Version | Manual tap set |
| Thread type | Standard thread (DIN 352) |
| Thread | M 10 |
| Slope [mm] | 1,50 |
| Core hole diameter [mm] | 8,5 |
| Square (DIN 10) [mm] | 5,5 |
Further information on GEWHM10
| Weight | 75 g / pcs |
| GTIN | 4050571165734 |
| Customs duty number | 82074010 |
Documents
- Catalogue page Atlas 9 (Page 991) (PDF)
- Data sheet (Print view)
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Payment options: