Skupina artiklov

Ventili z vmesno plošco NG 6, do 40 l/min*

Zgleden uprizoritev: Pressure relief valve NG 6 Zgleden uprizoritev: Pressure regulating valve NG 6 Zgleden uprizoritev: Throttle check valve NG 6 Zgleden uprizoritev: Unlockable check valve NG 6 Schematic symbol: Pressure relief valve (P -> T) Schematic symbol: Pressure relief valve (A -> T) Schematic symbol: Pressure relief valve (B -> T) Schematic symbol: Pressure relief valve (A -> T & B -> T) Schematic symbol: Pressure relief valve (A -> B & B -> A) Schematic symbol: Pressure control valve (P) Schematic symbol: Pressure regulating valve (A) Schematic symbol: Pressure regulating valve (B) Schematic symbol: Throttle check valve (A) Schematic symbol: Throttle check valve (B) Schematic symbol: Throttle check valve (A & B) Schematic symbol: Unlockable check valve (A) Schematic symbol: Unlockable check valve (B) Schematic symbol: Unlockable check valve (A & B)

Suitable:

NG 6 intermediate plate valves are used in combination with NG 6 directional valves. The intermediate plate valves are fitted between the directional valves and the connection plate. Each intermediate plate has a specific function, they control the strength, movement and speed of a hydraulic cylinder or a hydraulic motor.

Materials:

Body: Spheroidal cast iron, internal parts: Steel, seals: NBR

Media:

Hydraulic oils on the basis of mineral oil (viscosity: Bosch Rexroth: 10 - 500 mm²/s, alternatively: 20 - 400 mm²/s)

Operating pressure:

0 - 315 bar (alternatively: 0 - 320 bar)

Nominal flow:

up to approx. 60 l/min depending on the valve used (request pressure loss curves if required), we recommend usage up to approx. 40 l/min

Note:

The connection pattern NG 6 is standardised in accordance with DIN 24340-A6, ISO 4401-03, CETOP R 35 H-03 and NFPA-D03. The valves must be attached with screws of strength class 12.9.

Scope of delivery:

Valve including seals, without screws.
*our operating recommendation, **the one-way flow control can be changed by rotating, ***Seals from FKM

{{ $t('shop.all.dokumente') }}:

  • Catalogue page Atlas 9 (Page 811) atlas9_seiten/811.pdf
{{ $t('shop.display.artikelgruppe.mehr_informationen') }} {{ $t('shop.display.artikelgruppe.weniger_informationen') }}

{{ $t('shop.display.artikelgruppe.filtern') }}

{{ $t('shop.display.artikelgruppe.kein_eintrag') }}
Ventili z vmesno plošco NG 6, do 40 l/min*:
{{ $t('shop.all.artikelgruppe_n_von_m_artikeln', { anzahlArtikelAngezeigt: anzahlArtikelAngezeigt, anzahlArtikelGesamt: anzahlArtikelGesamt} ) }}
{{ $t('shop.all.unverbindliche_richtwerte') }}
Možnosti plačila:

{{ $t('shop.all.zahlweise_nachnahme') }}

{{ $t('shop.all.zahlweise.rg') }}

{{ $t('shop.all.spaetbestellservice') }}
{{ countdownAsString }} {{ $t('shop.modules.navi.fruehbucher-spaetbestellhinweis.noch') }}
{{ $t('shop.modules.navi.fruehbucher-spaetbestellhinweis.noch') }} {{ countdownAsString }}

{{ $t('shop.all.spaetbestellservice.hinweis') }}

{{ $t('shop.all.wochenendversand') }}
{{ $t('shop.modules.navi.fruehbucher-spaetbestellhinweis.noch') }} {{ countdownAsString }}

{{ $t('shop.all.wochenendversand.hinweis') }}

Pojavila se je napaka!

Pojavila se je napaka, znova naložite stran in poskusite znova.