Version:
Self-relieving pressure regulator with additional filtering using the centrifugal principle and sintered filter
Materials:
Body: die-cast zinc Z410 (model series 4 & 5: aluminium), spring hood: POM, diaphragms and seals: NBR, condensate container: polycarbonate
Temperature range:
-10 do +60 °C
Input pressure:
1.5 - 16 bar (model series 0 when using coupling kit 1.5 - 12 bar)
Pressure gauge connection:
G 1/4" (model series 0: G 1/8")
Pore width in the filter:
5 µm (model series 5: 40 µm)
Condensate draining:
semi-automatic****
Media:
Compressed air, neutral gases
Advantages:
•Automatic venting in the event of overpressure on the secondary side,
•Easy assembly of individual components using coupling kits within a model series and thread size,
•Hand wheel can be locked by pressing down on it
Max. condensate amount:
87 cm³
Switch panel thread:
87 cm³
Scope of delivery:
Pressure regulator including 50 mm pressure gauge
Flow:
12000 l/min **
Own air consumption:
Max. 1,5 l/min
Optional:
Version with metal bowl and inspection tube -M, automatic discharge -AM, automatic discharge closed without pressure (0 - 16 bar) -AMNC
*Standard series, please prefer for use, since the pressure control range is universally usable, **measured at P1=10 bar, P2=6.3 bar and 1 bar pressure drop, ****As soon as the input pressure drops below the min. input pressure, the drain valve opens automatically. By screwing the drain screw tight, the semi-automatic opening of the drain valve can be prevented.
{{ $t('shop.all.dokumente') }}: