Stainless steel compact flange ball valves with electrical quarter-turn actuator, PN 16/40

•2 additional limit switches,
•torque cut-off,
•variable voltage (DC or AC),
•manual emergency operation,
•integrated heating in actuator housing

Body: 1.4408, ball: 1.4408, seals: PTFE / FKM

-20 to +180 °C

Water, oil, compressed air, vacuum (max. -0.9 bar), fuels, solvents, aggressive media

Certificate 3.1

Electrical rotary actuator with optical position indicator, manual emergency operation and switch room heating Two additional limit switches are installed for further control requirements. An electronic torque limiting unit prevents damage in the event of overload. The manual emergency operation can be done without dismantling the external cladding. Do not use upside down!

Body: PA 6

-20 to +70 °C

24 - 240 V AC/DC, (drives can be operated with direct or alternating voltage)

IP 67

75%

Regulating time 140 sec. (only for drive size 2 & 3) -140, "Battery Safety Return" for emergency closing NC (default configuration) or emergency opening NO (conversion with a jumper) when there is a power failure -BSR, Positioning system 0 - 10 V or 4 - 20 mA (conversion with a jumper), precision: 3%, linearity: 2%, hysteresis: 3%, switch position NC or NO (conversion with a jumper) -DPS

In case of high media temperatures, the actuator must be cooled if necessary!