Data sheet

2/2-way brass solenoid valve G 1", -0,95 to 16 bar, normally closed (NC)
Item number:
M 2100 230V
Example illustration
Item description
Materials:
Bodies: brass, internal parts: brass / stainless steel, seal: NBR
Temperature range:
-10 °C to max. +90 °C (G 1-1/4" - G 1-1/2" and normally open (NO): -10 °C to max. +80 °C), ambient: max. +50 °C
Media:
Compressed air, neutral gases, water, neutral low-viscosity media, heating oil, other media on request
Installation position:
with standing and lying magnet
Control voltages:
Standard: 24 V DC, 230 V AC, upon request other voltages
Voltage tolerance:
± 10 %
Protection class:
IP 65 (plug size 3)
Optional:
FKM seal (-10°C to max. +130°C, G 1-1/4" - G 1-1/2": max. +80°C) -V, EPDM seal for air and hot water (-10°C to max. +120°C, G 1-1/4" - G 1-1/2": max. +80°C) -EP
Information:
These valves are always supplied with a solenoid coil and a connector plug.
Properties
Con­trol volt­age 230 V AC
func­tion nor­mally closed (NC)
Thread G 1"
Seals NBR
Op­er­at­ing pres­sure [bar] -0,95 to 16
DN [mm] 20
L [mm] 81,5
Kv value* [l/min] 124
Suc­tion per­for­mance [m³/h] 246
Suc­tion per­for­mance [l/min] 4100
Power con­sump­tion (AC) [VA] 18
Struc­tural shape so­le­noid coil G
Spare so­le­noid coil MAG G 230V
Media tem­per­a­ture [°C] -10 to +90
Further information:
Weight 950 g / pcs
GTIN 4050571472801
Customs duty number 84812090
RoHS compliant Yes
More information on this item and the process for ordering it can be found in our online shop https://www.landefeld.com under item number M 2100 230V.
Landefeld Druckluft und Hydraulik GmbH · Konrad-Zuse-Straße 1 · 34123 Kassel · Germany
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
As of: 26.03.2025