Data sheet

Electr. flanged ball valve, DN80-PN40 (DIN/EN), Positioning system 0-10V / 4-20mA
Item number:
KHFL 80/40 ELI-DPS
Example illustration
Item description
Advantages:
•2 zusätzliche Endschalter,
•Drehmomentabschaltung,
•variable Spannung (Gleich- oder Wechselspannung),
•Handnotbetätigung,
•im Antriebsgehäuse integrierte Heizung,
•Baulänge nach DIN 3202-F4 (DIN EN 558-1, Reihe 14),
•Kugelhahn DVGW zertifiziert für Gas (G 260, MOP 25/40, EN 14141)
Ball valve:
Materials:
Körper: Stahlguss, Kugel: 1.4408, Dichtungen: PTFE / FKM
Temperature range:
-20 to +180 °C (Brenngase nach G 260: bis max. +60°C)
Operating pressure:
-0,9 to 40 bar
Media:
Water, oil, compressed air, vacuum (max. - 0.9 bar), fuels, gases according to DVGW Worksheet up to 40 bar
Rotary actuator:
Description:
Electrical rotary actuator with optical position indicator, manual emergency operation and switch room heating Two additional limit switches are installed for further control requirements. An electronic torque limiting unit prevents damage in the event of overload. The manual emergency operation can be done without dismantling the external cladding. Do not use upside down!
Materials:
Body: PA 6
Temperature range:
-20 to +70 °C
Voltage:
24 - 240 V AC/DC, (drives can be operated with direct or alternating voltage)
Protection class:
IP 67
Power-on time:
75%
Optional:
Regulating time 140 sec. (only for drive size 2 & 3) -140, "Battery Safety Return" for emergency closing NC (default configuration) or emergency opening NO (conversion with a jumper) when there is a power failure -BSR, Positioning system 0 - 10 V or 4 - 20 mA (conversion with a jumper), precision: 3%, linearity: 2%, hysteresis: 3%, switch position NC or NO (conversion with a jumper) -DPS
Warning:
In case of high media temperatures, the actuator must be cooled if necessary!
Properties
Ver­sion Po­si­tion­ing sys­tem 0-10V / 4-​20mA
Flange con­nec­tion DN80-​PN40 (DIN/EN)
Nom­i­nal width [mm] 80
In­stal­la­tion length ball valve [mm] 180
Op­er­at­ing pres­sure [bar] -0,9 to 40
Reg­u­lat­ing time [s] 58
Spare dri­ves ELU 230-​7-DPS
Further information:
Weight 0 g / pcs
GTIN 4050571949617
Customs duty number 84818081
More information on this item and the process for ordering it can be found in our online shop https://www.landefeld.com under item number KHFL 80/40 ELI-DPS.
Landefeld Druckluft und Hydraulik GmbH · Konrad-Zuse-Straße 1 · 34123 Kassel · Germany
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
As of: 26.03.2025