Data sheet
Electr. flanged ball valve, DN100-PN40 (DIN/EN), Battery safety return
{{ $t('shop.all.artikelnummer') }}:
KHFL 100/40 ELI-BSR
Example illustration
{{ $t('shop.display.artikel.beschreibung_headline') }}
Advantages:
•2 additional limit switches,
•torque switch-off,
•variable voltage (DC or AC),
•manual override,
•heating integrated in the actuator housing,
•length to DIN 3202-F4 (DIN EN 558-1, series 14)
•Ball valve DVGW certified for gas (G 260, MOP 25/40, EN 14141)
•torque switch-off,
•variable voltage (DC or AC),
•manual override,
•heating integrated in the actuator housing,
•length to DIN 3202-F4 (DIN EN 558-1, series 14)
•Ball valve DVGW certified for gas (G 260, MOP 25/40, EN 14141)
Ball valve:
Materials:
Body: cast steel, ball: 1.4408, seal: PTFE / FKM
Temperature range:
-20 to +180 °C (combustion gases in acc. with G 260: up to +60°C)
Operating pressure:
-0,9 to 40 bar
Media:
Water, oil, compressed air, vacuum (max. -0.9 bar), fuels, hydrogen, fuel gases to G 260 to 40 bar
Rotary actuator:
Description:
Electrical rotary actuator with optical position indicator, manual emergency operation and switch room heating Two additional limit switches are installed for further control requirements. An electronic torque limiting unit prevents damage in the event of overload. The manual emergency operation can be done without dismantling the external cladding. Do not use upside down!
Materials:
Body: PA 6
Temperature range:
-20 to +70 °C
Voltage:
24 - 240 V AC/DC, (drives can be operated with direct or alternating voltage)
Protection class:
IP 67
Power-on time:
75%
Optional:
Regulating time 140 sec. (only for drive size 2 & 3) -140, "Battery Safety Return" for emergency closing NC (default configuration) or emergency opening NO (conversion with a jumper) when there is a power failure -BSR, Positioning system 0 - 10 V or 4 - 20 mA (conversion with a jumper), precision: 3%, linearity: 2%, hysteresis: 3%, switch position NC or NO (conversion with a jumper) -DPS
Warning:
In case of high media temperatures, the actuator must be cooled if necessary!
{{ $t('shop.display.artikel.eigenschaften_headline') }}
| Version | Battery safety return |
| Flange connection | DN100-PN40 (DIN/EN) |
| Nominal width [mm] | 100 |
| Installation length ball valve [mm] | 190 |
| Operating pressure [bar] | -0,9 to 40 |
| Regulating time [s] | 58 |
| Spare drives | ELU 230-7-BSR |
Further information:
| {{ $t('shop.all.gewicht') }} | 0 g / pcs |
| {{ $t('shop.all.gtin') }} | 4050571949396 |
| {{ $t('shop.display.artikel.zollwarennummer') }} | 84818081 |
| {{ $t('shop.all.hersteller') }} | Köly Deutschland |
Figure
More information on this item and the process for ordering it can be found in our online shop https://www.landefeld.com under item number KHFL 100/40 ELI-BSR.
Landefeld Druckluft und Hydraulik GmbH · Konrad-Zuse-Straße 1 · 34123 Kassel · Germany
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Our products arid goods are generally only intended for industrial and commercial uses.
Our products arid goods are generally only intended for industrial and commercial uses.
As of: 19.12.2025