Data sheet
High pressure 3-way ball valve, T-borehole, G 1", 0 to 420bar
Item number:
KH 3/10 T HD
Example illustration
Item description
Materials:
Body: galvanised steel, ball: hard chrome-plated steel, seal: POM / NBR, handle: zinc die-cast (from DN 20: straight - aluminium, cranked - galvanised steel)
Temperature range:
-10 to +80 °C
Media:
Hydraulic oils, heating oil (water only after release by us). Apply input pressure only on the centre hole.
Switching position:
Can be changed by moving the handle, according to table, to position T4. The standard position for T boreholes is position T1.
Optional:
NPT thread -NPT, pressurisation from all 3 sides (PN 400, >= G 1/2": PN 350), housing burnished -D3
Properties
| borehole | T-borehole |
| G | G 1" |
| DN [mm] | 25 |
| PN [bar] | 0 - 420 |
| Version | Standard |
| SW [mm] | 14 |
| Replacement handles aluminium straight | G KH SW14 |
| Replacement handles steel elbowed | G KH SW14 GK |
Further information:
| Weight | 2,3 kg / pcs |
| GTIN | 4050571413286 |
| Customs duty number | 84818081 |
| Manufacturer | Hydac |
Drawing:
Rysunek: Polozenia przelaczania
More information on this item and the process for ordering it can be found in our online shop https://www.landefeld.com under item number KH 3/10 T HD.
Landefeld Druckluft und Hydraulik GmbH · Konrad-Zuse-Straße 1 · 34123 Kassel · Germany
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
As of: 11.04.2025