Data sheet
Filler plug M 20x1,5, with air filter and dipstick, Plastic
Item number:
BSFM M20 K
Example illustration
Item description
Version:
The vent screws are delivered with or without the air filters. Breathers should be used with filters during usage in oil-hydraulic systems. In addition filter screws and vent screws can also be supplied with oil dipstick made of steel that can be shortened whenever desired.
Suitable:
as filler and breather for fluid containers such as hydraulic tanks, or gearbox filling and venting connections
Materials:
Type plastic: Body: polyamide, seal: NBR, air filter: PU foam, oil dipstick: zinc-plated steel, type brass: Body: brass, seal: Fasit 202 (mineral fibre with NBR), air filter: zinc-plated steel wire mesh
Temperature range:
-20 to +100 °C
Media:
Mineral oils (water only without oil dipstick)
Filter porosity:
air filter 50 to 60 µm
Properties
| Material | Plastic |
| Version | with air filter and dipstick |
| Thread | M 20x1,5 |
| Locking screw diameter [mm] | 41 |
Further information:
| Weight | 36 g / pcs |
| GTIN | 4050571228392 |
| Customs duty number | 84219910 |
| RoHS compliant | Yes |
More information on this item and the process for ordering it can be found in our online shop https://www.landefeld.com under item number BSFM M20 K.
Landefeld Druckluft und Hydraulik GmbH · Konrad-Zuse-Straße 1 · 34123 Kassel · Germany
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
As of: 26.03.2025