Data sheet
Compensator, DN40, R 1-1/2" (AG)-R 1-1/2" (AG), EPDM
{{ $t('shop.all.artikelnummer') }}:
KOM 40 AG
Example illustration
{{ $t('shop.display.artikel.beschreibung_headline') }}
Version:
elastic, form-pressed bellows, reinforcement carrier made of synthetic fibres, connections screwed on both the sides
Equalising capacity:
axial (compression/extension), lateral (lateral offset), angular (angular deviation)
Materials:
Bellows: EPDM (hot water, acid and alkalis resistant), thread connections: Malleable cast iron, galvanised zinc plated, flat seal: Aramide NBR
Temperature range:
max. +110 °C (depending on operating pressure)
Operating pressure:
-1 to 16 bar (from +60°C: 10 bar, from +100°C: 6 bar), burst pressure: 50 bar (For intermittent loading, the max. operating pressure should be set approx. 30% lower)
Warning:
When installing the compensator, it is urged to follow the assembly instructions in all cases!
Optional:
Bellows from NBR, oil resistant -B
{{ $t('shop.display.artikel.eigenschaften_headline') }}
| G1 | R 1-1/2" (male thread) |
| G2 | R 1-1/2" (male thread) |
| Bellows version | EPDM |
| Version | Male thread |
| DN [mm] | 40 |
| Axial compression [mm] | 30 |
| Axial stretching [mm] | 10 |
| Lateral offset [mm] | 15 |
| Angular deviation [°] | 25 |
| L [mm] | 239 |
| SW1 [mm] | 75 |
| SW2 [mm] | 54 |
Further information:
| {{ $t('shop.all.gewicht') }} | 2,8 kg / pcs |
| {{ $t('shop.all.gtin') }} | 4050571443382 |
| {{ $t('shop.display.artikel.zollwarennummer') }} | 40169991 |
| {{ $t('shop.display.artikel.rohskonform') }} | {{ $t('shop.all.ja') }} |
Figure
Drawing:
Zeichnung: Elastomer-Kompensator mit Außengewinde
Zeichnung: Ausgleichsfähigkeit axial (Stauchung)
Zeichnung: Ausgleichsfähigkeit axial (Streckung)
Zeichnung: Ausgleichsfähigkeit lateral (seitlicher Versatz)
Zeichnung: Ausgleichsfähigkeit angular (Winkelabweichung)
More information on this item and the process for ordering it can be found in our online shop https://www.landefeld.com under item number KOM 40 AG.
Landefeld Druckluft und Hydraulik GmbH · Konrad-Zuse-Straße 1 · 34123 Kassel · Germany
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Our products arid goods are generally only intended for industrial and commercial uses.
Our products arid goods are generally only intended for industrial and commercial uses.
As of: 19.12.2025