Data sheet

Single clamping cartridge for ISO15552-cylinder Ø 80 & 100mm
{{ $t('shop.all.artikelnummer') }}:
XL 80/100 BREMS P
Example illustration
{{ $t('shop.display.artikel.beschreibung_headline') }}
Application:
The locking unit is used to firmly hold the round stock (chromium-plated steel, stainless steel) such as piston rods, guides etc. in the desired position. Special adaptors for cylinders are available. During venting (energy failure), the clamping unit automatically clamps the round stock and releases it (powerless break!) during pressure application.
Materials:
Body: anodized aluminium, clamp jaws: brass, piston: POM, spring: spring steel, seals: NBR / PUR
Temperature range:
-20 to +80 °C
Operating pressure:
4 to 10 bar
Scope of delivery:
Locking unit is delivered including fastening screws
Advantages:
•short response time and high switching frequency possible,
•long service life,
•exactly reproducible positioning thanks to exact guidance of the jaws in the housing,
•due to the use of special brass extremely low wear on jaws and the rod,
•automatic, safe break in the event of energy failure (powerless break!)
Warning:
The locking unit should not be used as a safety device!
Warning:
When using pneumatic cylinders, the locking unit should be opened only if equilibrium of forces prevails at the piston, otherwise the backward movement of the piston rod could lead to an accident. Shutting off the supply of compressed air on both the sides (e.g. using a 5/3-way valve, centre position shut off) guarantees no safety! In many cases a 5/3-way valve can cause breathing in the centre position. Please ask us in individual cases.
{{ $t('shop.display.artikel.eigenschaften_headline') }}
Version Single clamping cartridge
Piston diameter [mm] 80 & 100
Piston rod diameter (f8 / h9) [mm] 25
Retention force (static) [N] 5.000
Requires cylinder piston rod extension [mm] 82
A1 [mm] 89,0
A2 [mm] 70
A3 [mm] 10,0
A4 [mm] 60
B [mm] 120
C [mm] 130
D1 [mm] 55
D2 [mm] 48
D4 [mm] 11,0
F [mm] 65,0
G1 M 10
G2 M 8
L1 [mm] 16
L2 [mm] 58
L3 [mm] 18
L5 [mm] 92
L6 [mm] 115
L7 [mm] 65,0
L8 [mm] 27,0
L9 [mm] 38,5
L10 [mm] 16
Further information:
{{ $t('shop.all.gewicht') }} 850 g / pcs
{{ $t('shop.all.gtin') }} 4050571799670
{{ $t('shop.display.artikel.zollwarennummer') }} 84123100
Figure
Drawing:
Drawing: Clamping cartridge
More information on this item and the process for ordering it can be found in our online shop https://www.landefeld.com under item number XL 80/100 BREMS P.
Landefeld Druckluft und Hydraulik GmbH · Konrad-Zuse-Straße 1 · 34123 Kassel · Germany
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Our products arid goods are generally only intended for industrial and commercial uses.
As of: 19.12.2025