Data sheet

FISCHER heavy duty anchor FAZIIK 10x10mm, 75mm long, Zinc plated steel
Item number:
DUBEL FAZ 10/10 K
Example illustration
Item description
Application:
Short bolts with a reduced anchoring depth is the most cost-effective option for a wide variety of applications, such as the mounting of cable runs and façade substructures. For mounting heavy loads in cracked concrete (tensile area) and non-cracked concrete (pressure zone). The FAZ II K is suitable for pre-positioned and through hole installation.
Recommended torque during anchoring:
Ø 10: 45 Nm, Ø 12: 60 Nm
Advantages:
•The properties of the K version are key in minimising drilling effort and hammer blows when driving the bolt anchors in, which produces savings in terms of effort and assembly time.
•The shallow hole depth of the K version enables quicker assembly and reduces the number of reinforcement strikes.
Properties
Ma­te­r­ial Zinc plated steel
Bore di­am­e­ter [mm] 10
Min. hole depth for through hole in­stal­la­tion (h2) [mm] 65
min. an­chor­ing depth (hef) [mm] 40
An­chor rod [mm] 75
Max. us­able length (tfix) [mm] 10
Male thread x thread length M 10 x 33
Further information:
Weight 55 g / pcs
GTIN 4050571842840
Customs duty number 73181900
Manufacturer Fischer
Drawing:
Zeichnung: Fischer FAZ II K Schwerlastankerbolzen
More information on this item and the process for ordering it can be found in our online shop https://www.landefeld.com under item number DUBEL FAZ 10/10 K.
Landefeld Druckluft und Hydraulik GmbH · Konrad-Zuse-Straße 1 · 34123 Kassel · Germany
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
As of: 14.04.2025