Data sheet
special rubber hose (to 100°C), 13x22 mm
Item number:
OLN M1L 13
Example illustration
Item description
Materials:
Inner core: synthetic rubber (NBR), outer cover: synthetic rubber (CR), abrasion-resistant, resistant to ozone, weathering, UV, and cracking, pressure carrier: Reyon mesh (Ø 25 & 32: two Reyon meshes with steel wire helix)
Temperature range:
Mineral oil, hydraulic fluids, lubricating greases, and oiled air: -40 to +100 °C (short-term +120 °C), heating oil (EL/L), diesel fuel: -40°C to +40°C
Media:
Engine lubricants, hydraulic fluids, grease nipple, diesel fuels, heating oil (EL/L), oil-bearing air and vacuum. Please inquire as to other media. Not suitable for glycol and glycol-water mixes, as well as biodiesel and rape seed methyl ester (RME).
Delivered as:
Due to the manufacturing process, we cannot exclude that the goods are delivered in parts. We try to deliver a maximum of 3 sections smaller than 20 m. and none of the sections is shorter than 3 m.
Properties
| Hose diameter (inner) [mm] | 13 |
| Hose diameter (outer) [mm] | 22 |
| Min. bend radius [mm] | 90 |
| Operating pressure [bar] | -0,9 to 30 |
| Burst pressure [bar] | 120 |
Further information:
| Weight | 340 g / m |
| GTIN | 4050571535278 |
| Customs duty number | 40093100 |
| RoHS compliant | Yes |
| Manufacturer | Continental ContiTech |
More information on this item and the process for ordering it can be found in our online shop https://www.landefeld.com under item number OLN M1L 13.
Landefeld Druckluft und Hydraulik GmbH · Konrad-Zuse-Straße 1 · 34123 Kassel · Germany
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
As of: 22.04.2025