Hoja de datos
SIES-8M-PS-24V-K-7,5-OE (551386) proximity sensor
Número de artículo:
OT-FESTO027717
Representación de ejemplo
Propiedades
| Complies to standard | EN 60947-5-2 |
| Permission |
RCM mark, c UL us - Listed (OL) |
| CE certificate (see declaration of conformity) | to EU EMC directive |
| Material information |
Copper and PTFE-free, RoHs compliant |
| Measurement switching distance [mm] | 1,5 |
| Reduction factors |
Steel pc. 37 = 1.0, aluminium = 0,62, stainless steel V2A = 0,95, Copper = 0.6, brass = 0,72 |
| ambient temperature [°C] | -25 to 70 |
| Control output | PNP |
| Switching element function | NO contact |
| Max. switching frequency [Hz] | 4.500 |
| Short circuit resistance | Cycling |
| Operating voltage range DC [V] | 10 to 30 |
| Empty run current [mA] | <= 10 mA |
| Reverse polarity protection | for all electrical connections |
| Electrical connection |
3-wire, cable |
| Cable length [MTR] | 7,5 |
| Cable sleeve material | TPE-U(PU) |
| size | Slot 8 |
| Fastening type |
Insertable from above into the slot, Permanently screwed, Flush with T-slot |
| Housing material |
PA, PUR, High-alloyed stainless steels |
| Switching status indicator | LED yellow |
| Protection category |
IP65, IP67 |
| Max. output current [mA] | 150 |
| Design | For T-slot |
| KC-mark | KC-EMV |
| Repeatability at constant conditions | <= 0.05 mm, side approaching |
| Connection outlet direction | along |
| Test conditions line |
Bending radius strength to Festo standard, Cable track: 5 million cycles, bending radius 75 mm, Test conditions on request |
| Line properties | Standard+cable track |
| Ambient temperature for moving cable placements [°C] | -5 to 70 |
| Insulation voltage [V] | 50 |
| Surge voltage strength [kV] | 0,8 |
| Degree of contamination | 3 |
Más información:
| Peso | 100 g / Udad |
| GTIN | 4052568094836 |
| Código aduanero | 85365019 |
| Fabricante | Festo |
Otras informaciones sobre este artículo, así como la posibilidad de solicitarlo, la encontrará en nuestra Tienda Online https://www.landefeld.com bajo el número de artículo OT-FESTO027717 .
Landefeld Druckluft und Hydraulik GmbH · Konrad-Zuse-Straße 1 · 34123 Kassel · Alemania
¡Todas las indicaciones se entienden como valores de referencia no vinculantes! No asumimos ninguna responsabilidad por la elección de datos no confirmada por escrito. Las indicaciones de presión se refieren, salvo indicación en contrario, a líquidos del grupo II a +20°C
Versión: 07.04.2025