Data sheet

Electrical. High pressure ball valve, G 1-1/4", 24 to 240 V (AC/DC)
Item number:
KH 114 HD ELI-ES
Example illustration
Item description
Advantages:
•2 additional limit switches,
•torque cut-off,
•variable voltage (DC or AC),
•manual emergency operation,
•integrated heating in actuator housing
Ball valve
Materials:
Body: galvanised steel, ball: hard chrome-plated steel, ball seal: POM, shift shaft seal: NBR
Temperature range:
-20°C up to max. +100°C (G 1-1/4" to G 2": -10°C up to max. +80°C)
Media:
Hydraulic oil, heating oil, vacuum (max. -0.3 bar), (water only after approval from us)
Optional:
Ball valve made of stainless steel 1.4571 -ES
Rotary actuator
Description:
Electrical rotary actuator with optical position indicator, manual emergency operation and switch room heating Two additional limit switches are installed for further control requirements. An electronic torque limiting unit prevents damage in the event of overload. The manual emergency operation can be done without dismantling the external cladding. Do not use upside down!
Materials:
Body: PA 6
Temperature range:
-20 to +70 °C
Voltage:
24 - 240 V AC/DC, (drives can be operated with direct or alternating voltage)
Protection class:
IP 67
Power-on time:
75%
Optional:
Regulating time 140 sec. (only for drive size 2 & 3) -140, "Battery Safety Return" for emergency closing NC (default configuration) or emergency opening NO (conversion with a jumper) when there is a power failure -BSR, Positioning system 0 - 10 V or 4 - 20 mA (conversion with a jumper), precision: 3%, linearity: 2%, hysteresis: 3%, switch position NC or NO (conversion with a jumper) -DPS
Warning:
In case of high media temperatures, the actuator must be cooled if necessary!
Properties
Ver­sion Stain­less steel
Volt­age [V] 24 to 240 V (AC/DC)
Thread G 1-1/4"
DN [mm] 32
In­stal­la­tion length ball valve [mm] 110
PN [bar] -0.3 to 350
Reg­u­lat­ing time [s] 13
Spare dri­ves ELU 230-4
Media tem­per­a­ture [°C] -10 to +80
Further information:
Weight 6 kg / pcs
GTIN 4050571407582
Customs duty number 84818081
RoHS compliant Yes
Manufacturer Köly Deutschland
More information on this item and the process for ordering it can be found in our online shop https://www.landefeld.com under item number KH 114 HD ELI-ES.
Landefeld Druckluft und Hydraulik GmbH · Konrad-Zuse-Straße 1 · 34123 Kassel · Germany
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
As of: 23.04.2025