Data sheet

2/2-way ES solenoid valve G 1/8", 0 to 15 bar, normallyopen (NO)
Item number:
MO 218 ES 24VAC
Example illustration
Item description
Materials:
Body G 1/8" and G 1/4": 1.4104, G 1/2" to G 2": 1.4581 (internal parts 1.4104), seal: FKM
Temperature range:
-20 to +130 °C, ambience: -10 to +50 °C
Media:
Compressed air, neutral gases, water, neutral low-viscosity media, other media on request
Installation position:
With upright magnets, (G 3/8" - G 2" also with horizontal magnets)
Control voltages:
Standard: 24 V DC, 230 V AC, upon request other voltages
Voltage tolerance:
± 10 %
Protection class:
IP 65 (plug size 3)
Information:
These valves are always supplied with a solenoid coil and a connector plug.
Warning:
For opening or closing, servo-controlled valves require a pressure difference between the valve inlet and valve outlet. The pressure difference is given as minimum pressure. There is a pressure compensation in the valve, resulting that no or little medium is used at the valve outlet, the valve will no longer function (it opens or closes unreliably).
Properties
Con­trol volt­age 24 V AC
func­tion nor­mal­ly­open (NO)
Thread G 1/8"
Op­er­at­ing pres­sure [bar] 0 - 15
DN [mm] 3
L [mm] 45
Kv value* [l/min] 4,5
Power con­sump­tion (AC) [VA] 18
Struc­tural shape so­le­noid coil GH
Spare so­le­noid coil MAG GH 24VAC
Further information:
Weight 450 g / pcs
GTIN 4050571494520
Customs duty number 84818099
RoHS compliant Yes
More information on this item and the process for ordering it can be found in our online shop https://www.landefeld.com under item number MO 218 ES 24VAC.
Landefeld Druckluft und Hydraulik GmbH · Konrad-Zuse-Straße 1 · 34123 Kassel · Germany
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
As of: 26.03.2025