Data sheet

pneumatic hydraulic pump, Plastic-tank
{{ $t('shop.all.artikelnummer') }}:
PA 6
Example illustration
{{ $t('shop.display.artikel.beschreibung_headline') }}
Temperature range:
-20 to +65 °C
Connection thread, hydraulic:
NPT 3/8" (FT)
Connection thread, compressed air:
NPT 1/4" (IG) - use RN 14NPT14G MS to adapt to G 1/4".
required compressed air supply:
3 - 8 bar
Scope of delivery:
The pumps are delivered filled with HLP oil.
Note:
Since the pressure ratio between compressed air and hydraulics is approx. 1/100, it makes sense to connect a fine pressure regulator in front of the pump to limit the maximum pressure.
Advantages:
•operated with compressed air instead of by hand,
•equipped with safety valve and air filter,
•operated conveniently by pedal or hand pedal
{{ $t('shop.display.artikel.eigenschaften_headline') }}
Tank material Plastic
Conveyor volumes without pressure [cm³/min] 1.200
Conveyor volumes 700 bar [cm³/min] 160
Tank volume [LTR] 1,7
Usable oil volume [cm³] 1600
Further information:
{{ $t('shop.all.gewicht') }} 7 kg / pcs
{{ $t('shop.all.gtin') }} 4050571540852
{{ $t('shop.display.artikel.zollwarennummer') }} 84122120
{{ $t('shop.all.hersteller') }} SPX Power Team
Figure
More information on this item and the process for ordering it can be found in our online shop https://www.landefeld.com under item number PA 6.
Landefeld Druckluft und Hydraulik GmbH · Konrad-Zuse-Straße 1 · 34123 Kassel · Germany
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Our products arid goods are generally only intended for industrial and commercial uses.
As of: 19.12.2025