{{ $t('shop.all.spaetbestellservice.hinweis') }}
Construction set up |
diaphragm valve, Force controlled |
Actuation type | Electrical |
Sealing principle | Soft |
installation position | Magnet vertical |
Fastening type | pipe installation |
Fitting connection | G1 1/2 |
Electrical connection |
Wiring diagram Form A acc. to EN 175301-803, Plug, Square shape, acc. to EN 175301-803 |
Nominal width [mm] | 40,0 |
Valve function | 2/2 closed monostable |
Hand assist actuation | none |
Flow direction | Not reversible |
medium |
Compressed air to ISO 8573-1:2010 [7:-:-], Inert gases, mineral oil, Neutral liquids, Water, Other media on request |
Nominal pressure fitting | 40 |
pressure difference [bar] | 0 |
Coil characteristic value | 110 V AC: 50/60 Hz, pull-in power 30 VA, holding power 30 VA |
Permitted voltage oscillations | ± 10 % |
Medium pressure [bar] | 0 to 10 |
Max. viscosity [mm²/s] | 22 |
Medium temperature [°C] | -10 to 80 |
ambient temperature [°C] | -10 to 35 |
Leak rate to EN 12266-1 | A |
Flow Kv [m³/h] | 22,5 |
Normal nominal flow [l/min] | 23.500 |
Shifting time on [ms] | 620 |
Shifting time off [ms] | 1.140 |
Material information |
LABS containing materials included, RoHs compliant |
Housing material | Cast stainless steel |
Material number housing | 1.4581 |
Seals material | EPDM |
Screws material | High-alloyed stainless steels |
Material number screw | 1.4301 |
Product weight [g] | 4.500 |
Protection category | IP65 |
Corrosion resistant class KBK | 3 - severe corrosion stress |
CE certificate (see declaration of conformity) |
to EU pressure vessel directive, to EU low voltage directive |
{{ $t('shop.all.gtin') }} | 4052568236366 |
{{ $t('shop.display.artikel.zollwarennummer') }} | 84818087 |
{{ $t('shop.all.hersteller') }} | Festo |
{{ $t('shop.all.spaetbestellservice.hinweis') }}
{{ $t('shop.all.wochenendversand.hinweis') }}
Pojavila se je napaka, znova naložite stran in poskusite znova.