Preprosto naročite za vikend do nedelje ob 15. uri (ali če je v ponedeljek praznik do ponedeljka ob 15. uri) in prejmite blago v Nemčiji prek GLS-a naslednji delovni dan pred 12. uro (stroški: 5%, min. 30,00 &euro).
Precision hydraulic tube, seamless, 8x1,5mm, Jeklo, naoljeno
Št. Izdelka:
HR 8X1,5
10,57 €
z DDV
Količina m
Opis artikla
Materials:
E235 + N (ST 37.4 normally annealed - NBK), all tubes undergo eddy current or ultrasound testing, tolerances in accordance with DIN 2391, quality grade C, operating pressure in accordance with DIN 2413
Manufacturer lengths:
6 m ±1 m
Temperature range:
-40 do +400 °C (from +120°C notice pressure reductions)
Warning:
When ordering, please state shipping length! Packaging service: max 2 m, overnight express: max. 3 m, freight: max 6m
E235 + N (ST 37.4 normally annealed - NBK), all tubes undergo eddy current or ultrasound testing, tolerances in accordance with DIN 2391, quality grade C, operating pressure in accordance with DIN 2413
Manufacturer lengths:
6 m ±1 m
Temperature range:
-40 do +400 °C (from +120°C notice pressure reductions)
Warning:
When ordering, please state shipping length! Packaging service: max 2 m, overnight express: max. 3 m, freight: max 6m
Lastnosti
| Premer trde cevi (zunaj) | 8 |
| Debelina stene | 1,5 |
| Izvedba | Jeklo, naoljeno |
| Izračunani tlak* | -1 do 414 |
Dodatne informacije o HR8X1,5
| Teža | 240 g / m |
| GTIN | 4050571364168 |
| Embalažna enota | 6 m |
| Številka carinskega blaga | 73043120 |
YouTube videi:
Dokumenti
- Catalogue page Atlas 9 (Page 411) (PDF)
- Podatkovni list (Pogled za tiskanje)
- Podatkovni list (angleščina) (Pogled za tiskanje)
*calculated in accordance with DIN 2413 validity range III for dynamic loading P = 20 x K x s x c/(S x (da + s x c)) (bar). Material parameter K = 226 N/mm² (torsional endurance). Safety factor S = 1.5 for static and dynamic loading. Factor c to take into account the wall thickness deviation for static and dynamic loading = 0,8 for tubes with outside diameters of 4 and 5; 0,85 for tubes with outside diameters of 6 and 8; and 0,9 for larger tube outside diameters.
Notes: The stated calculated pressures do not take into account any corrosion surcharge. Tubes with a diameter ratio (OD/ID max) of >= 1.35 have also been calculated for a predominantly static load in accordance with DIN 2413 validity range III, but with K = 235 N/mm². **Oiled instead of phosphatised
Vse navedbe podatkov so nezavezujoče orientacijske vrednosti! Za izbiro podatkov, za katere ne izdamo pisnega potrdila, ne prevzemamo jamstev. Navedbe tlaka, v kolikor ni navedeno drugače, se nanašajo na tekočine skupine II. pri +20°C.
Pribor
Možnosti plačila: