Elektr. Flanschkugelhahn, DN25-PN40 (DIN/EN), Sistem za pozicioniranje 0–10 V/4–20mA

KHFL 25/40 ELI-DPS

Zgleden uprizoritev: Flanschkugellhahn PN 40 mit elektrischem Schwenkantrieb TA-Luft
3337,53€ z DDV
Kos
{{ $t('shop.display.artikel.hinweis_alternative') }}
{{ $t('shop.display.artikel.beschreibung_headline') }}
Advantages:
•2 zusätzliche Endschalter,
•Drehmomentabschaltung,
•variable Spannung (Gleich- oder Wechselspannung),
•Handnotbetätigung,
•im Antriebsgehäuse integrierte Heizung,
•Baulänge nach DIN 3202-F4 (DIN EN 558-1, Reihe 14)


Ball valve PN 16:


Materials:
Körper: GGG40, Kugel: Messing hartverchromt, Dichtungen: PTFE / NBR

Temperature range:
-10°C bis +100°C

Media:
Water, oil, compressed air, fuels

Ball valve PN 40:


Materials:
Körper: Stahlguss, Kugel: Edelstahl, Dichtungen: PTFE / FKM

Temperature range:
-20°C bis +120°C

Media:
Water, oil, compressed air, vacuum (max. -0.9 bar), fuels, solvents

Rotary actuator:


Description:
Electrical rotary actuator with optical position indicator, manual emergency operation and switch room heating Two additional limit switches are installed for further control requirements. An electronic torque limiting unit prevents damage in the event of overload. The manual emergency operation can be done without dismantling the external cladding. Do not use upside down!

Materials:
Body: PA 6

Temperature range:
-20 do +70 °C

Voltage:
24 - 240 V AC/DC, (drives can be operated with direct or alternating voltage)

Protection class:
IP 67

Power-on time:
75%

Optional:
Regulating time 140 sec. (only for drive size 2 & 3) -140, "Battery Safety Return" for emergency closing NC (default configuration) or emergency opening NO (conversion with a jumper) when there is a power failure -BSR, Positioning system 0 - 10 V or 4 - 20 mA (conversion with a jumper), precision: 3%, linearity: 2%, hysteresis: 3%, switch position NC or NO (conversion with a jumper) -DPS

Warning:
In case of high media temperatures, the actuator must be cooled if necessary!
{{ $t('shop.display.artikel.eigenschaften_headline') }}
Izvedba Sistem za pozicioniranje 0–10 V/4–20mA
Prirobnični priklop DN25-PN40 (DIN/EN)
Nazivna širina 25
Vgradna dolžina krogelna pipa 125
Obratovalni tlak -0,9 do 40
Nastavljalni čas 9
Nadomestni pogoni ELU 230-3-DPS
KHFL25/40ELI-DPS
{{ $t('shop.all.gtin') }} 4050571949440
{{ $t('shop.display.artikel.zollwarennummer') }} 84818081
{{ $t('shop.all.dokumente') }}

 
{{ $t('shop.all.unverbindliche_richtwerte') }}

Pribor

Možnosti plačila:

{{ $t('shop.all.zahlweise_nachnahme') }}

{{ $t('shop.all.zahlweise.rg') }}

{{ $t('shop.all.spaetbestellservice') }}
{{ countdownAsString }} {{ $t('shop.modules.navi.fruehbucher-spaetbestellhinweis.noch') }}
{{ $t('shop.modules.navi.fruehbucher-spaetbestellhinweis.noch') }} {{ countdownAsString }}

{{ $t('shop.all.spaetbestellservice.hinweis') }}

{{ $t('shop.all.wochenendversand') }}
{{ $t('shop.modules.navi.fruehbucher-spaetbestellhinweis.noch') }} {{ countdownAsString }}

{{ $t('shop.all.wochenendversand.hinweis') }}

Pojavila se je napaka!

Pojavila se je napaka, znova naložite stran in poskusite znova.