Electric PVC ball valve, Rp 1-1/4", Notranji navoj, EPDM-seal
Št. Izdelka:
KH 114 PVCEP ELI
739,17 €
z DDV
Količina Kos
Opis artikla
Advantages:
•2 additional limit switches,
•torque cut-off,
•variable voltage (DC or AC),
•manual emergency operation,
•integrated heating in actuator housing
Ball valve
Materials:
Body: PVC-U, bridge: PP, seals: EPDM or FKM, ball seat: PTFE
Temperature range:
0 do +60 °C
Operating range:
Industry, water treatment or water supply
Rotary actuator
Description:
Electrical rotary actuator with optical position indicator, manual emergency operation and switch room heating Two additional limit switches are installed for further control requirements. An electronic torque monitoring unit prevents damage in the event of overload. The manual emergency operation can be done without dismantling the external cladding. Do not use upside down!
Materials:
Body: PA 6
Temperature range:
-20 do +70 °C
Voltage:
24 - 240 V AC/DC, (drives can be operated with direct or alternating voltage)
Protection class:
IP 67
Power-on time:
75%
Optional:
Regulating time 140 sec. (only for drive size 2 & 3) -140, "Battery Safety Return" for emergency closing NC (default configuration) or emergency opening NO (conversion with a jumper) when there is a power failure -BSR, Positioning system 0 - 10 V or 4 - 20 mA (conversion with a jumper), precision: 3%, linearity: 2%, hysteresis: 3%, switch position NC or NO (conversion with a jumper) -DPS
Warning:
Not suitable for compressed air or other gases under pressure!
•2 additional limit switches,
•torque cut-off,
•variable voltage (DC or AC),
•manual emergency operation,
•integrated heating in actuator housing
Ball valve
Materials:
Body: PVC-U, bridge: PP, seals: EPDM or FKM, ball seat: PTFE
Temperature range:
0 do +60 °C
Operating range:
Industry, water treatment or water supply
Rotary actuator
Description:
Electrical rotary actuator with optical position indicator, manual emergency operation and switch room heating Two additional limit switches are installed for further control requirements. An electronic torque monitoring unit prevents damage in the event of overload. The manual emergency operation can be done without dismantling the external cladding. Do not use upside down!
Materials:
Body: PA 6
Temperature range:
-20 do +70 °C
Voltage:
24 - 240 V AC/DC, (drives can be operated with direct or alternating voltage)
Protection class:
IP 67
Power-on time:
75%
Optional:
Regulating time 140 sec. (only for drive size 2 & 3) -140, "Battery Safety Return" for emergency closing NC (default configuration) or emergency opening NO (conversion with a jumper) when there is a power failure -BSR, Positioning system 0 - 10 V or 4 - 20 mA (conversion with a jumper), precision: 3%, linearity: 2%, hysteresis: 3%, switch position NC or NO (conversion with a jumper) -DPS
Warning:
Not suitable for compressed air or other gases under pressure!
Lastnosti
| Napetost | 24 do 240 V (AC/DC) |
| Tesnila | EPDM |
| Izvedba | Notranji navoj |
| Navoj krogelna pipa | Rp 1-1/4" |
| Izvedba (električni pogon) | Standard |
| DN | 32 |
| Vgradna dolžina krogelna pipa | 121 |
| PN | 0 - 16 |
| Pretok* | 1000 |
| Nastavljalni čas | 9 |
| Nadomestni pogoni | ELU 230-2 |
Dodatne informacije o KH114PVCEPELI
| Teža | 2,6 kg / Kos |
| GTIN | 4050571407926 |
| Številka carinskega blaga | 84818081 |
| Skladno z RoHS | Da |
| Proizvajalec | Köly Deutschland |
YouTube videi:
Dokumenti
- Catalogue page Atlas 9 (Page 539) (PDF)
- Dokumentacijo: electrically actuated ball valves (PDF)
- Podatkovni list (Pogled za tiskanje)
- Podatkovni list (angleščina) (Pogled za tiskanje)
*applies to water and 1 bar pressure drop
Vse navedbe podatkov so nezavezujoče orientacijske vrednosti! Za izbiro podatkov, za katere ne izdamo pisnega potrdila, ne prevzemamo jamstev. Navedbe tlaka, v kolikor ni navedeno drugače, se nanašajo na tekočine skupine II. pri +20°C.
Pribor
Možnosti plačila: