2. Valvole a sfera - valvole - valvole antiritorno - catturasporco
  3. Valvole a sfera e valvole ad azionamento elettrico
  4. Valvole a sfera flangiate compatte con attuatore rotante elettrico, PN 16/40
  5. KHFLK 15/40 ELI-DPS

Electr. compact flange ball v., DN15-PN40 (DIN/EN), Sistem za pozicioniranje 0–10 V/4–20mA

Št. Izdelka:

KHFLK 15/40 ELI-DPS

Vsi artikli te skupine
2.435,93 € z DDV
Kos
Opis artikla
Advantages:
 •2 additional limit switches,
•torque cut-off,
•variable voltage (DC or AC),
•manual emergency operation,
•integrated heating in actuator housing

Ball valve:

Materials:
 Body: steel, ball: 1.4408, seals: PTFE / FKM (PN 16: Housing: GG25, ball: hard chrome-plated brass, seals: PTFE/NBR)

Temperature range:
 -20 °C to +180 °C (PN 16: -10°C to +100°C)

Media:
 Water, oil, compressed air, fuels (DN 15 to DN 32: also vacuum down to -0.9 bar)

Rotary actuator:

Description:
 Electrical rotary actuator with optical position indicator, manual emergency operation and switch room heating Two additional limit switches are installed for further control requirements. An electronic torque limiting unit prevents damage in the event of overload. The manual emergency operation can be done without dismantling the external cladding. Do not use upside down!

Materials:
 Body: PA 6

Temperature range:
 -20 do +70 °C

Voltage:
 24 - 240 V AC/DC, (drives can be operated with direct or alternating voltage)

Protection class:
 IP 67

Power-on time:
 75%

Optional:
 Regulating time 140 sec. (only for drive size 2 & 3) -140, "Battery Safety Return" for emergency closing NC (default configuration) or emergency opening NO (conversion with a jumper) when there is a power failure -BSR, Positioning system 0 - 10 V or 4 - 20 mA (conversion with a jumper), precision: 3%, linearity: 2%, hysteresis: 3%, switch position NC or NO (conversion with a jumper) -DPS

Warning:
 In case of high media temperatures, the actuator must be cooled if necessary!
Lastnosti
Iz­ved­ba Sis­tem za po­zi­ci­o­ni­ra­nje 0–10 V/4–20mA
Pri­rob­nič­ni pri­klop DN15-​PN40 (DIN/EN)
Na­ziv­na ši­ri­na 15
Vgra­dna dol­ži­na kro­gel­na pipa 39
Obra­to­val­ni tlak -0,9 do 40
Na­sta­vljal­ni čas 9
No­tra­nji navoj pri­rob­ni­ca (na stran pri­rob­ni­ce) 4x M 12
Na­do­me­stni po­go­ni ELU 230-​2-DPS
Dodatne informacije o KHFLK15/40ELI-DPS
GTIN 4050571947361
Številka carinskega blaga 84818081
Dokumenti

 
Vse navedbe podatkov so nezavezujoče orientacijske vrednosti! Za izbiro podatkov, za katere ne izdamo pisnega potrdila, ne prevzemamo jamstev. Navedbe tlaka, v kolikor ni navedeno drugače, se nanašajo na tekočine skupine II. pri +20°C.
Ni na zalogi

Pribor

Pri­rob­nic­na te­sni­la DVGW, BAM & TA-​zrak cer­ti­fi­ci­ra­na, pri­po­ro­clji­vo KTW
32 Iz­del­kov
Plo­ski te­snil­ni trak iz PTFE-​ja, le­pi­len zadaj
5 Iz­del­kov
Šestrob­ni vi­ja­ki, navoj do glave, DIN 933/ISO 4017
632 Iz­del­kov
Fle­ksi­bil­ni kr­mil­ni vodi, YSLY-​JZ
9 Iz­del­kov
Kom­pak­tni pri­rob­nic­ni kro­gel­ni ven­ti­li s pol­nim pre­to­kom, PN 16/40
11 Iz­del­kov
Ro­ta­cij­ski po­go­ni z ele­k­tric­nim po­go­nom
34 Iz­del­kov
Možnosti plačila:

Po povzetju

Račun

Odprema ob vikendih

Preprosto naročite za vikend do nedelje ob 15. uri (ali če je v ponedeljek praznik do ponedeljka ob 15. uri) in prejmite blago v Nemčiji prek GLS-a naslednji delovni dan pred 12. uro (stroški: 5%, min. 30,00 &euro).