DFPD-300-RP-90-RS60-F0710 (8048140) semi-rotary drive
Št. Izdelka:
OT-FESTO070633
490,43 €
z DDV
Količina Kos
Lastnosti
| Position drive dimensions | 300 |
| Flange drilling screen | F0710 |
| Swivel angle [deg] | 90 |
| Adjustable range end position at 0° [deg] | -5 to 5 |
| Adjustable range end position at 90° [deg] | -5 to 5 |
| Shaft connection Depth [mm] | 24 |
| Standard connection to fitting | ISO 5211 |
| installation position | arbitrary |
| Principle of operation | single action |
| Construction set up | Toothed rack/pinion |
| Closing direction | Right closing |
| Valve connection corresponds to standard | VDI/VDE 3845 (NAMUR) |
| Connection for position controllers and position feedback signal comply with standard | VDI/VDE 3845 Size AA 2 |
| Safety Integrity Level (SIL) | Produkt kann eingesetzt werden in SRP/CS bis SIL 2 High Demand |
| Operating pressure [bar] | 2 to 8 |
| Nominal operating pressure [bar] | 6,0 |
| CE certificate (see declaration of conformity) | to EU EX protection directive (ATEX) |
| Certified awarding point | TÜV Rhineland |
| ATEX gas category | II 2G |
| ATEX dust category | II 2D |
| Ex ignition protection type gas | Ex h IIC T4 Gb X |
| Ex ignition protection type dust | Ex h IIIC T105°C Db X |
| Ex ambient temperature | -20°C <= Ta <= +80°C |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Information about operating and control medium |
Oiled operation possible (required in further operations), Pressure dew point 10°C under ambient and medium temperature |
| Bearing temperature [°C] | -20 to 60 |
| ambient temperature [°C] | -20 to 80 |
| Rotary torque for nominal operating pressure and 0° pivot angle [Nm] | 221,0 |
| Rotary torque for nominal operating pressure and 90° pivot angle [Nm] | 115,3 |
| Information about torque | The operating torque of the actuator may not be higher than the maximum permitted torque listed in ISO 5211, related to the size of the fastening flange and the coupling. |
| Air consumption a 6 bar per cycle 0°-90°-0° [LTR] | 11,0 |
| Shaft connection | T22 |
| Pneumatic connection | G1/4 |
| Material information | RoHs compliant |
| Connection plate material | Aluminium wrought alloy, anodised |
| Cover material | Alu-Druckguss, beschichtet |
| Seals material | NBR |
| Housing material | Aluminium wrought alloy, anodised |
| Piston material | Aluminium die casting |
| Bearing material | POM |
| Lug material | Steel |
| Screws material | High-alloyed stainless steels |
| Shaft material | Nickel-plated steel |
| Spring force torque at a swivel angle 0° [Nm] | 108,4 |
| Spring force torque at 90° [Nm] | 214,1 |
| Spring material | spring steel |
Dodatne informacije o OT-FESTO070633
| Teža | 13 kg / Kos |
| GTIN | 4052568288068 |
| Številka carinskega blaga | 84123900 |
| Proizvajalec | Festo |
Dokumenti
- Group data sheet: DFPD (english) (PDF)
- Dokumentacijo (slovene) (PDF)
- Podatkovni list (Pogled za tiskanje)
- Podatkovni list (angleščina) (Pogled za tiskanje)
Vse navedbe podatkov so nezavezujoče orientacijske vrednosti! Za izbiro podatkov, za katere ne izdamo pisnega potrdila, ne prevzemamo jamstev. Navedbe tlaka, v kolikor ni navedeno drugače, se nanašajo na tekočine skupine II. pri +20°C.
Možnosti plačila: