2/2-potni magnetni ventil G 1-1/2", brez elektricnega toka zaprto (NC),12 V DC Eco
Št. Izdelka:
SLP 112 ES 12V=
Opis artikla
Materials:
Bodies: 1.4408, internal parts: stainless steel, seal: FKM
Temperature range:
-20°C to +120°C, ambience: maks. +65 °C
Media:
Compressed air, neutral gases, water, neutral low-viscosity media, other media on request
Installation position:
With upright magnets
Control voltages:
Standard: 24 V DC, 230 V AC, upon request other voltages
Voltage tolerance:
± 10 %
Protection class:
IP 65
Structural shape solenoid coil:
P (plug size 3)
Information:
These valves are always supplied with a solenoid coil and a connector plug.
Warning:
For opening or closing, servo-controlled valves require a pressure difference between the valve inlet and valve outlet. The pressure difference is given as minimum pressure. There is a pressure compensation in the valve, resulting that no or little medium is used at the valve outlet, the valve will no longer function (it opens or closes unreliably).
Bodies: 1.4408, internal parts: stainless steel, seal: FKM
Temperature range:
-20°C to +120°C, ambience: maks. +65 °C
Media:
Compressed air, neutral gases, water, neutral low-viscosity media, other media on request
Installation position:
With upright magnets
Control voltages:
Standard: 24 V DC, 230 V AC, upon request other voltages
Voltage tolerance:
± 10 %
Protection class:
IP 65
Structural shape solenoid coil:
P (plug size 3)
Information:
These valves are always supplied with a solenoid coil and a connector plug.
Warning:
For opening or closing, servo-controlled valves require a pressure difference between the valve inlet and valve outlet. The pressure difference is given as minimum pressure. There is a pressure compensation in the valve, resulting that no or little medium is used at the valve outlet, the valve will no longer function (it opens or closes unreliably).
Lastnosti
| Izvedba | 2/2-potni magnetni ventil |
| Krmilna napetost | 12 V DC |
| Funkcija | brez električnega toka zaprto (NC) |
| Navoj | G 1-1/2" |
| Obratovalni tlak | 0,5 - 16 |
| DN | 40 |
| L | 131 |
| Kv-vrednost* | 427 |
| Poraba energije (DC) | 13 |
| Izvedba magnetna tuljava | P |
| Nadomestna magnetna tuljava | MAG P 12V= |
| Nadomestna membrana NBR | SLP 114112 MEM N |
| Nadomestna membrana FKM | SLP 114112 MEM V |
| Nadomestna membrana EPDM | SLP 114112 MEM EP |
Dodatne informacije o SLP112ES12V=
| Teža | 2,4 kg / Kos |
| GTIN | 4050571631185 |
| Številka carinskega blaga | 84812090 |
| Skladno z RoHS | Da |
| Proizvajalec | EMC |
YouTube videi:
Dokumenti
- Catalogue page Atlas 9 (Page 714) (PDF)
- Dokumentacijo (PDF)
- Dokumentacijo: DGRL, EMC, NSR statement (PDF)
- Podatkovni list (Pogled za tiskanje)
- Podatkovni list (angleščina) (Pogled za tiskanje)
*Water flow rate at +20°C, 1 bar pressure at the valve inlet, free discharge
Vse navedbe podatkov so nezavezujoče orientacijske vrednosti! Za izbiro podatkov, za katere ne izdamo pisnega potrdila, ne prevzemamo jamstev. Navedbe tlaka, v kolikor ni navedeno drugače, se nanašajo na tekočine skupine II. pri +20°C.
Pribor
Možnosti plačila: