{{ $t('shop.all.spaetbestellservice.hinweis') }}
Product weight [g] | 360 |
Protection category | IP20 |
Corrosion resistant class KBK | 1 - low corrosion stress |
Material information | RoHs compliant |
ambient temperature [°C] | -5 to 50 |
Housing material |
PA, Aluminium die casting |
Dimensions W x L x H | 85 mm x 122.9 mm x 55.1 mm |
Fieldbus interface |
Socket, M12 (ASI Out), plug, M12 (ASI In) |
Device specific diagnosis |
Watchdog / IO status, ASI address, ASI voltage, Additional supply missing or under-voltage |
Max. number of valve spaces | 8 |
Response delay inputs | Typical: 3 ms at 24 V |
Quantity slaves per device | 2 |
Operating voltage range DC electronics / sensor | US+ / US- : <= AS-Interface bus voltage - 2,5V |
Operating voltage DC AS interface [V] | 26.5 to 31.6 |
Operating voltage DC load voltage [V] | 21.6 to 26.4 |
Information about load voltage | Via load voltage connection (24 V DC) |
Logic level digital inputs |
OFF: -30 - 5V, ON: 11 - 30V |
Max. number of inputs | 8 |
Residual ripple AS interface | <= 20 mVss |
Residual ripple load voltage | 4 Vss |
Power input for load supply from AS interface and load voltage connection |
Max. cumulative inputs 350 mA, max. cumulative current outputs MPA1: 540 mA, max. cumulative current outputs MPA2: 1065 mA |
Bearing temperature [°C] | -20 to 40 |
Characteristic curves inputs | to IEC 1131-2 type 02 |
Switching logic inputs | PNP (Positive switching) |
Addressing area |
1A ... 31A, 1B ... 31B |
LED display bus specific |
AS-i: As interface Operation, Aux/pwr: As interface voltage supply, Fault: As interface Error |
LED display product specific | Signal at input / output |
Product identification |
Profil: S-7.A.E, ID-Code: ID=Ah, ID1=Fh, ID2=Eh, IO-Code: 7h |
Fastening type |
With throughway bores, With Slot rail, Selectively: |
{{ $t('shop.all.gtin') }} | 4052568219710 |
{{ $t('shop.display.artikel.zollwarennummer') }} | 85371098 |
{{ $t('shop.all.hersteller') }} | Festo |
{{ $t('shop.all.spaetbestellservice.hinweis') }}
{{ $t('shop.all.wochenendversand.hinweis') }}
Wystąpił błąd; wczytaj stronę jeszcze raz i spróbuj ponownie.