{{ $t('shop.all.spaetbestellservice.hinweis') }}
Settings range swivel angle [deg] | 0 to 270 |
Stroke reduction at the end positions | 5 ° |
Smallest positioning stroke |
15° for soft stop, 5° during positioning |
Piston diameter | 40 mm |
Swivel angle [deg] | 0 to 272 |
Dampening | P: Elastic silencer rings / plates double-sided |
Position the integration location | arbitrary |
Integration position soft stop | horizontal |
Measurement principle travel measurement system | Analogue |
Construction set up |
Drive shaft ball bearing mounted, Rotary vane |
Position detection |
With Angle measurement system integrated, For proximity switch |
Operating pressure positioning / soft stop [bar] | 4 to 8 |
Max. swivel frequency at 6 bar [Hz] | 2 |
Max. movement speed [deg/s] | 2.000 |
Min. movement speed [deg/s] | 50 |
Typical positioning time short stroke, horizontal | 0,25/0,25 s |
Typical positioning time long stroke, horizontal | 0,30/0,55 s |
Connection resistance [kOhm] | 5 |
Recommended grinder current [µA] | < 1 µA |
Principle of operation | double acting |
Max. operating voltage DC [V] | 42 |
Max. grinder current short term [µA] | 10.000 |
Max. power input [mA] | 4 |
Nominal operating voltage DC [V] | 10 |
Tolerance connection resistance [%] | 20 |
Permitted voltage oscillations | < 1 % |
CE certificate (see declaration of conformity) | to EU EMC directive |
Operating medium | Compressed air to ISO 8573-1:2010 [6:4:4] |
Information about operating and control medium | Oiled operation not possible |
Continuous impact strength DIN&EC 68 parts 2-82 | Tested to severity class 2 |
Corrosion resistant class KBK | 0 - No corrosion stressing |
Protection category |
IP65, acc. to IEC 60529 |
Oscillation strength to DIN/IEC 68 part 2-6 | Tested to severity class 2 |
ambient temperature [°C] | -10 to 60 |
Impact energy at the end positions [J] | 0,10 |
Max. axial force [N] | 120 |
Max. mass inertia, horizontal [kg/m²] | 0,12 |
Max. mass inertia, vertical [kg/m²] | 0,12 |
Max. radial force [N] | 350 |
Min. mass moment of inertia, horizontal [kg/m²] | 0,0060 |
Min. mass moment of inertia, vertical [kg/m²] | 0,0060 |
Theoretical torque at 6 bar [Nm] | 20 |
Product weight [g] | 3.950 |
Resolution angle [deg] | <= 0,1 deg |
output signal | Analogue |
Independent linearity | 0,0025 |
Repeatability positioning | ± 0,3 deg |
Repeatability soft stop end position | < 0.2 deg |
Repeatability soft stop intermediate position | ± 2 deg |
Electrical connection: path measurement system | 4 pin |
Cable length [MTR] | 30 |
Fastening type | with female thread |
Pneumatic connection | G1/8 |
Housing measurement system material |
Aluminium wrought alloy, anodized |
Material information | Copper and PTFE-free |
Stopper lever material |
Aluminium wrought alloy, anodized |
Drive shaft material | Nickel-plated steel |
Fixed limit stop material | Steel |
Housing material |
Aluminium wrought alloy, anodized |
Measurement system coupling material | TPE-U(PU) |
Feather key material | Steel |
Rotary vane material | PET reinforced |
Plug housing material | PA reinforced |
Cylinder tube material | Aluminium wrought alloy |
{{ $t('shop.all.gewicht') }} | 3.950 g / Stk |
{{ $t('shop.all.gtin') }} | 4052568208868 |
{{ $t('shop.display.artikel.zollwarennummer') }} | 84123900 |
{{ $t('shop.all.hersteller') }} | Festo |
{{ $t('shop.all.spaetbestellservice.hinweis') }}
{{ $t('shop.all.wochenendversand.hinweis') }}
Er is een fout opgetreden, laad de pagina opnieuw en probeer het nogmaals.