EGSS-BS-KF-45-125-10P-ST-M-H1# (8083818) mini slide unit

OT-FESTO085028

Illustrazione esemplare: EGSS-BS-KF-45-125-10P-ST-M-H1# (8083818)
1365,31€ incl. IVA
Pz.
{{ $t('shop.display.artikel.hinweis_alternative') }}
{{ $t('shop.display.artikel.eigenschaften_headline') }}
Working stroke [mm] 125
size 45
Stroke reserve [mm] 0
Reversing play [µm] 150
Spindle diameter [mm] 10
Spindle pitch [mm/U] 10
installation position arbitrary
Guide ball guide
Construction set up Elektrischer Mini-Schlitten,
mit Kugelgewindetrieb,
mit integriertem Antrieb
Motor type Step motor
Referencing Fixed stopper block negative,
Fixed stopper block positive,
Reference switch
Spindle type Ball screw drive
Position detection für Näherungsschalter,
Motorencoder
Rotor position transducer Encoder absolut single turn
Rotor position transducer measurement principle Magnetic
Additional functions Bedienoberfläche,
Integrierte Endlagenerkennung
Display LED
Operation-readiness display LED
Max. acceleration [m/s²] 5
Max. speed [m/s] 0,25
Repeatability ±0.015 mm
Properties digital logic outputs nicht galvanisch getrennt,
konfigurierbar
Power-on time 100 %
Insulation protection class B
Max. current digital logic outputs [mA] 100
Max. power input [mA] 3.000
Nominal voltage DC [V] 24
Nominal current [A] 3
Parameterising interface IO-Link,
Bedienoberfläche
Rotor position transducer resolution [Bit] 16
Permitted voltage oscillations ± 15 %
Voltage supply, connection type Plug
Voltage supply, connection technology M12x1, T-codiert nach EN 61076-2-111
Voltage supply, number of poles/wires 4
Permission RCM mark
KC-mark KC-EMV
CE certificate (see declaration of conformity) acc. to EU-EMV Directive,
acc. to EU-RoHS Directive
Oscillation strength Transport use test with severity level 1 to FN 942017-4 and EN 60068-2-6
Shock resistance Shock test with degree of severity 1 to FN 942017-5 and EN 60068-2-27
Corrosion resistant class KBK 0 - No corrosion stressing
Bearing temperature [°C] -20 to 60
Relative humidity 0 - 90 %
Protection category IP40
Protection class III
ambient temperature [°C] 0 to 50
Information about ambient temperature Oberhalb der Umgebungstemperatur von 30 °C ist eine Leistungsreduktion von 2 % pro K einzuhalten.
Dynamic load factor fixed bearing [N] 7.413
Dynamic load factor linear guide [N] 3.240
Dynamic load factor ball screw drive [N] 3.200
Max. force Fy [N] 1.314
Max. force Fz [N] 1.314
Max. torque Mx [Nm] 8,14
Max. torque My [Nm] 7,05
Max. torque Mz [Nm] 7,05
Max. radial force on drive shaft [N] 340
Max. feed force Fx [N] 120
Guideline payload, horizontal [KGM] 6
Guideline payload, vertical [KGM] 6
Static load factor ball screw drive [N] 5.900
Static load factor linear guide [N] 5.630
Feed constant [mm/U] 10
Static load factor fixed bearing [N] 3.966
Guideline running performance [km] 5.000
Maintenance interval Lifetime lubrication
Moving mass at 0 mm stroke [g] 212
Weight supplement per 10 mm stroke [g] 63
Base weight at 0 mm stroke [g] 1.238
Product weight [g] 2.024
Supplement moved mass per 10 mm stroke [g] 30
Quantity digital logic outputs 24 V DC 2
Quantity digital logic inputs 2
Logic input specification in Anlehnung an IEC 61131-2, Typ 1
Work area logic input [V] 24
IO-Link, SIO mode support yes
Properties logic inputs nicht galvanisch getrennt,
konfigurierbar
IO-Link, report Device V 1.1
IO-Link, communication mode COM3 (230.4 kBaud)
IO-Link, port type A
IO-Link, number of ports 1
IO-Link, process data width OUT 2 Bytes
IO-Link, process data contents OUT 1 bit (Move in),
1 bit (Move out),
1 bit (Quit Error)
IO-Link, process data width IN 2 Bytes
IO-Link, process data contents IN 1 bit (State Device),
1 bit (State Move),
1 bit (State in),
1 bit (State out)
IO-Link, service data unit IN 32 bit Force,
32 bit Position,
32 bit Speed
IO-Link, minimum cycle time 1 ms
IO-Link, data memory needed [Byte] 500
Max. line length 20 m bei IO-Link Betrieb,
15 m Ausgänge,
15 m Eingänge
Switching logic outputs PNP (Positive switching)
Switching logic inputs PNP (Positive switching)
IO-Link, connection technology Plug
Logikschnittstelle, Anschlussart Plug
Logikschnittstelle, Anschlusstechnik M12x1 A coded to EN 61076-2-101
Logikschnittstelle, Anzahl Pole/Adern 8
Logikschnittstelle, Anschlussbild 00992264
Fastening type with female threads,
with centring sleeve,
with accessories,
with cylinder pin
Material information LABS containing materials included,
RoHs compliant
Carriage guide material Roller bearing steel
Guide carriage material Roller bearing steel
Housing material Aluminium wrought alloy, anodised
Joch plate material Aluminium wrought alloy, anodised
Piston rod material High-alloyed stainless steels
Carriage material Aluminium wrought alloy, anodised
Spindle nut material Roller bearing steel
Spindle material Roller bearing steel
OT-FESTO085028
{{ $t('shop.all.gewicht') }} 2 kg / Pz.
{{ $t('shop.all.gtin') }} 4052568457723
{{ $t('shop.display.artikel.zollwarennummer') }} 84798997
{{ $t('shop.all.hersteller') }} Festo
{{ $t('shop.all.dokumente') }}

 
{{ $t('shop.all.unverbindliche_richtwerte') }}
Metodi di pagamento:

{{ $t('shop.all.zahlweise_nachnahme') }}

{{ $t('shop.all.zahlweise.rg') }}

{{ $t('shop.all.spaetbestellservice') }}
{{ countdownAsString }} {{ $t('shop.modules.navi.fruehbucher-spaetbestellhinweis.noch') }}
{{ $t('shop.modules.navi.fruehbucher-spaetbestellhinweis.noch') }} {{ countdownAsString }}

{{ $t('shop.all.spaetbestellservice.hinweis') }}

{{ $t('shop.all.wochenendversand') }}
{{ $t('shop.modules.navi.fruehbucher-spaetbestellhinweis.noch') }} {{ countdownAsString }}

{{ $t('shop.all.wochenendversand.hinweis') }}

Si è verificato un errore!

Si è verificato un errore, ricarica la pagina e riprova.