Flow meter/monitor, 20 to 60 l/min, Nickel-plated brass

Application:
Flow monitors monitor a flow quantity that can be set. If this is exceeded or undershot, a contact gets actuated. A voltage supply is not necessary because of the potential-free reed contacts. The additional scale allows reading the momentary flow directly on the instrument.

Temperature range:
-20 to +120 °C, Environment: max. +80 °C

Protection class:
IP 53

Measurement principle:
Spring loaded float

Installation position:
arbitrarily (preferred from bottom to top)

Direction of flow:
only in one direction

Electrical connection:
Right-angle connector installation size 3, 3-pole (DIN 43650 / EN 175301-803 A) (Flat pin)

Switch type:
Closer (NO)

Switching capacity:
250 V AC, 100 VA, max. 5 A / 250 V DC, 100 W, max. 5 A

Media:
Oils and other fluids with 30 - 600 cSt viscosity (0.1 - 0.8 l/min: max. 400 cSt)

Advantages:
•Scale and switching point do not have to be adjusted according to the medium and pressure.

Material	Nickel-plated brass
Switching range [l/min]	20 - 60
Display range [l/min]	20 - 60
Thread	G 1"
PN [bar]	250

{{ $t('shop.all.gewicht') }}	1,2 kg / pcs
{{ $t('shop.all.gtin') }}	4050571253578
{{ $t('shop.display.artikel.zollwarennummer') }}	90261081
{{ $t('shop.display.artikel.rohskonform') }}	{{ $t('shop.all.ja') }}