Filling indication switch, can be cut to length 120 to 500 mm, 1 switch point

Application:
for general applications in hydraulics, mechanical engineering, plant engineering and tank construction. Also well suited for fouled media, but should not be used for media with a strong flow. The easy adjustment of the switching position allows use of the switch for many different applications and reduces the costs of stock and spare parts inventory.

Materials:
Body: polyamide, switching rod: 1.4301, float valve: NBR, seal: neoprene

Temperature range:
-20 to +100 °C

Operating pressure:
max. 10 bar

Installation position:
vertical

Protection class:
IP 65

Fixing on the tank cover:
Flange (pitch circle 43, hole 35, 3x M 4)

Float dimensions:
Ø 30 x 60 mm

Electrical connection:
Right-angle connector, size 3, 4-pin (DIN 43650 / EN 175301-803 A) (Flat pin)

Switch type:
1x Changer

Switching capacity:
250 V (AC), 60 VA, max. 1 A / 250 V (DC), 60 W, max. 1 A

Media:
Water, effluent water, hydraulic oil, machine oil, cooling lubricant, diesel and other fluids

Advantages:
•Switching position can be defined by shortening (sawing off) the switching rod at will in the range 120 - 500 mm (pull out the float beforehand),
•also suitable for fouled media, since the switching rod is used instead of a sliding tube,
•since the float does not need a magnet, it is completely non-sensitive to iron particles in the medium (for example, cooling lubricant)

Switching position L1 [mm]

120 - 500

{{ $t('shop.all.gewicht') }}	170 g / pcs
{{ $t('shop.all.gtin') }}	4050571310431
{{ $t('shop.display.artikel.zollwarennummer') }}	84819000
{{ $t('shop.display.artikel.rohskonform') }}	{{ $t('shop.all.ja') }}