Electr. flap DN150-PN25 (DIN/EN) GGG40/stainless steel/EPDM
Item number:
KLZ 150/25 BBA ELI
€3,706.98
incl. VAT
Quantity pcs
Item description
Butterfly valve
Materials:
Body: GGG40 epoxy-coated
Washer: Stainless steel
Cuff: EPDM (-10°C up to max. +110°C) -A, NBR (+5°C up to max. +85°C) -B
Media:
liquid and gaseous neutral media (depending on the material combination)
Lengths:
DIN 3202-K1, ISO 5752 series 20, EN 558-1 series 20, BS 5155 table 6 column 4, API 609 table1
Rotary actuator
Description:
Electrical rotary actuator with optical position indicator, manual emergency operation and switch room heating Two additional limit switches are installed for further control requirements. An electronic torque limiting unit prevents damage in the event of overload. The manual emergency operation can be done without dismantling the external cladding. Do not use upside down!
Materials:
Body: PA 6
Temperature range:
Voltage:
24 - 240 V AC/DC, (drives can be operated with direct or alternating voltage)
Protection class:
Power-on time:
75%
Optional:
"Battery Safety Return" for emergency closing NC (default configuration) or emergency opening NO (conversion with a jumper) when there is a power failure -BSR, Positioning system 0 - 10 V or 4 - 20 mA (conversion with a jumper), precision: 3%, linearity: 2%, hysteresis: 3%, switch position NC or NO (conversion with a jumper) -DPS
Warning:
In case of high media temperatures, the actuator must be cooled if necessary!
Materials:
Body: GGG40 epoxy-coated
Washer: Stainless steel
Cuff: EPDM (-10°C up to max. +110°C) -A, NBR (+5°C up to max. +85°C) -B
Media:
liquid and gaseous neutral media (depending on the material combination)
Lengths:
DIN 3202-K1, ISO 5752 series 20, EN 558-1 series 20, BS 5155 table 6 column 4, API 609 table1
Rotary actuator
Description:
Electrical rotary actuator with optical position indicator, manual emergency operation and switch room heating Two additional limit switches are installed for further control requirements. An electronic torque limiting unit prevents damage in the event of overload. The manual emergency operation can be done without dismantling the external cladding. Do not use upside down!
Materials:
Body: PA 6
Temperature range:
Voltage:
24 - 240 V AC/DC, (drives can be operated with direct or alternating voltage)
Protection class:
Power-on time:
75%
Optional:
"Battery Safety Return" for emergency closing NC (default configuration) or emergency opening NO (conversion with a jumper) when there is a power failure -BSR, Positioning system 0 - 10 V or 4 - 20 mA (conversion with a jumper), precision: 3%, linearity: 2%, hysteresis: 3%, switch position NC or NO (conversion with a jumper) -DPS
Warning:
In case of high media temperatures, the actuator must be cooled if necessary!
Properties
| Design | Intermediate flange valve |
| Version | Standard |
| Flange connection | DN150-PN25 (DIN/EN) |
| Sleeve material | EPDM |
| Nominal width [mm] | 150 |
| Installation length [mm] | 56 |
| Operating pressure, liquids (non-hazardous) [bar] | 25 |
| Operating pressure, liquids (hazardous) [bar] | 25 |
| Operating pressure, gases (non-hazardous) [bar] | 25 |
| Media temperature [°C] | -10 to +110 |
| Fields of application | general and industrial application (free of mineral oil), untreated water, compressed air (oil-free), neutral gaseous media, swimming pool water |
| Regulating time [s] | 58 |
| Spare drives | ELU 230-7 |
Further information on KLZ150/25BBAELI
| GTIN | 4050571952259 |
| Customs duty number | 84818081 |
| Manufacturer | Köly |
Documents
- Catalogue page Atlas 9 (Page 549b) (PDF)
- Data sheet (Print view)
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Not in stock
Accessories
Payment options: