Electr. flanged ball valve, DN80-PN40 (DIN/EN), Positioning system 0-10V / 4-20mA
Item number:
KHFL 80/40 ELI-DPS
Item description
Advantages:
•2 zusätzliche Endschalter,
•Drehmomentabschaltung,
•variable Spannung (Gleich- oder Wechselspannung),
•Handnotbetätigung,
•im Antriebsgehäuse integrierte Heizung,
•Baulänge nach DIN 3202-F4 (DIN EN 558-1, Reihe 14),
•Kugelhahn DVGW zertifiziert für Gas (G 260, MOP 25/40, EN 14141)
Ball valve:
Materials:
Körper: Stahlguss, Kugel: 1.4408, Dichtungen: PTFE / FKM
Temperature range:
-20 to +180 °C (Brenngase nach G 260: bis max. +60°C)
Operating pressure:
-0,9 to 40 bar
Media:
Water, oil, compressed air, vacuum (max. - 0.9 bar), fuels, gases according to DVGW Worksheet up to 40 bar
Rotary actuator:
Description:
Electrical rotary actuator with optical position indicator, manual emergency operation and switch room heating Two additional limit switches are installed for further control requirements. An electronic torque limiting unit prevents damage in the event of overload. The manual emergency operation can be done without dismantling the external cladding. Do not use upside down!
Materials:
Body: PA 6
Temperature range:
-20 to +70 °C
Voltage:
24 - 240 V AC/DC, (drives can be operated with direct or alternating voltage)
Protection class:
IP 67
Power-on time:
75%
Optional:
Regulating time 140 sec. (only for drive size 2 & 3) -140, "Battery Safety Return" for emergency closing NC (default configuration) or emergency opening NO (conversion with a jumper) when there is a power failure -BSR, Positioning system 0 - 10 V or 4 - 20 mA (conversion with a jumper), precision: 3%, linearity: 2%, hysteresis: 3%, switch position NC or NO (conversion with a jumper) -DPS
Warning:
In case of high media temperatures, the actuator must be cooled if necessary!
•2 zusätzliche Endschalter,
•Drehmomentabschaltung,
•variable Spannung (Gleich- oder Wechselspannung),
•Handnotbetätigung,
•im Antriebsgehäuse integrierte Heizung,
•Baulänge nach DIN 3202-F4 (DIN EN 558-1, Reihe 14),
•Kugelhahn DVGW zertifiziert für Gas (G 260, MOP 25/40, EN 14141)
Ball valve:
Materials:
Körper: Stahlguss, Kugel: 1.4408, Dichtungen: PTFE / FKM
Temperature range:
-20 to +180 °C (Brenngase nach G 260: bis max. +60°C)
Operating pressure:
-0,9 to 40 bar
Media:
Water, oil, compressed air, vacuum (max. - 0.9 bar), fuels, gases according to DVGW Worksheet up to 40 bar
Rotary actuator:
Description:
Electrical rotary actuator with optical position indicator, manual emergency operation and switch room heating Two additional limit switches are installed for further control requirements. An electronic torque limiting unit prevents damage in the event of overload. The manual emergency operation can be done without dismantling the external cladding. Do not use upside down!
Materials:
Body: PA 6
Temperature range:
-20 to +70 °C
Voltage:
24 - 240 V AC/DC, (drives can be operated with direct or alternating voltage)
Protection class:
IP 67
Power-on time:
75%
Optional:
Regulating time 140 sec. (only for drive size 2 & 3) -140, "Battery Safety Return" for emergency closing NC (default configuration) or emergency opening NO (conversion with a jumper) when there is a power failure -BSR, Positioning system 0 - 10 V or 4 - 20 mA (conversion with a jumper), precision: 3%, linearity: 2%, hysteresis: 3%, switch position NC or NO (conversion with a jumper) -DPS
Warning:
In case of high media temperatures, the actuator must be cooled if necessary!
Properties
| Version | Positioning system 0-10V / 4-20mA |
| Flange connection | DN80-PN40 (DIN/EN) |
| Nominal width [mm] | 80 |
| Installation length ball valve [mm] | 180 |
| Operating pressure [bar] | -0,9 to 40 |
| Regulating time [s] | 58 |
| Spare drives | ELU 230-7-DPS |
Further information on KHFL80/40ELI-DPS
| GTIN | 4050571949617 |
| Customs duty number | 84818081 |
Documents
- Catalogue page Atlas 9 (Page 541d) (PDF)
- Data sheet (Print view)
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Not in stock
Accessories
Payment options: