2. Ball valves - dampers - check valves - dirt traps
  3. Electrically actuated ball valves & dampers
  4. Compact flanged ball valve with electrical quarter-turn actuator, PN 16/40
  5. KHFLK 80/16 ELI

Electr. compact flange ball v., DN80-PN16 (DIN/EN), Standard

Item number:

KHFLK 80/16 ELI

All items of this group
€2,095.17 incl. VAT
pcs
Item description
Advantages:
 •2 additional limit switches,
•torque cut-off,
•variable voltage (DC or AC),
•manual emergency operation,
•integrated heating in actuator housing

Ball valve:

Materials:
 Body: steel, ball: 1.4408, seals: PTFE / FKM (PN 16: Housing: GG25, ball: hard chrome-plated brass, seals: PTFE/NBR)

Temperature range:
 -20 °C to +180 °C (PN 16: -10°C to +100°C)

Media:
 Water, oil, compressed air, fuels (DN 15 to DN 32: also vacuum down to -0.9 bar)

Rotary actuator:

Description:
 Electrical rotary actuator with optical position indicator, manual emergency operation and switch room heating Two additional limit switches are installed for further control requirements. An electronic torque limiting unit prevents damage in the event of overload. The manual emergency operation can be done without dismantling the external cladding. Do not use upside down!

Materials:
 Body: PA 6

Temperature range:
 -20 to +70 °C

Voltage:
 24 - 240 V AC/DC, (drives can be operated with direct or alternating voltage)

Protection class:
 IP 67

Power-on time:
 75%

Optional:
 Regulating time 140 sec. (only for drive size 2 & 3) -140, "Battery Safety Return" for emergency closing NC (default configuration) or emergency opening NO (conversion with a jumper) when there is a power failure -BSR, Positioning system 0 - 10 V or 4 - 20 mA (conversion with a jumper), precision: 3%, linearity: 2%, hysteresis: 3%, switch position NC or NO (conversion with a jumper) -DPS

Warning:
 In case of high media temperatures, the actuator must be cooled if necessary!
Properties
Ver­sion Stan­dard
Flange con­nec­tion DN80-​PN16 (DIN/EN)
Nom­i­nal width [mm] 80
In­stal­la­tion length ball valve [mm] 120
Op­er­at­ing pres­sure [bar] 0 - 16
Reg­u­lat­ing time [s] 29
Fe­male thread flange (per flange side) 8x M 16
Spare dri­ves ELU 230-5
Further information on KHFLK80/16ELI
GTIN 4050571947606
Customs duty number 84818081
Documents

 
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Not in stock

Accessories

Flange gas­kets DVGW, BAM & TA-​Luft cer­ti­fied, KTW rec­om­mended
32 items
PTFE face seal­ing tape with ad­he­sive back
5 items
Hexag­o­nal screws, thread to ap­prox­i­mate head, DIN 933 / ISO 4017
632 items
Con­trol cable, flex­i­ble, YSLY-​JZ
9 items
Com­pact flanged ball valves, full bore, PN 16/40
11 items
Elec­tri­cally dri­ven ro­tary ac­tu­a­tor
34 items
Payment options:

Cash on delivery

Invoice

Late ordering service
251 min left

When you place an order online Monday - Thursday from 16:30 - 21:00, or on Friday from 16:30 - 18:00, we will ship your order on request on the same day by GLS (charge: 5%, min. € 10,00).