{{ $t('shop.all.spaetbestellservice.hinweis') }}
- {{ ergebnis }}
-
{{ ergebnis.artikelnummer }}({{ ergebnis.artikelbezeichnung }})
{{ $t('shop.modules.login.willkommen') }}
{{ $t('shop.display.bestellassistent.anmelden.bereits_kunde') }}
{{ $t('shop.display.bestellassistent.anmelden.neu_kunde') }}
{{ $t('shop.modules.login.anmeldung_unterbenutzer') }}
{{ $t('shop.display.bestellassistent.anmelden.neu_kunde') }}
{{ anzahlArtikel }}
{{ $n(gesamtpreis, 'curprec') }}
{{ $t('shop.display.index.gespeicherter_warenkorb') }}
{{ $t('shop.display.index.hinweis_gespeicherter_warenkorb', { 'lastChange': $date(new Date(lastChange * 1000), 'datetimeMin'), 'anzahlPositionen': anzahlPositionen }) }}
{{ anzahlPositionen }} {{ $t('shop.modules.warenkorb_wiederherstellung.artikel_anzeigen') }}
{{ $n(e.anzeigeartikel.Artikelmenge, 'menge') }} {{ $t('shop.all.einheit.' + e.anzeigeartikel.Einheit) }}
{{ anzahlPositionen }} {{ $t('shop.modules.warenkorb_wiederherstellung.artikel_ausblenden') }}
Complete locking unit for ISO15552-cylinder Ø 63mm
{{ $t('shop.all.artikelnummer') }}:
XL 63 BREMS
{{ $t('shop.all.menge') }}
{{ $t('shop.display.artikel.hinweis_alternative') }}
{{ $t('shop.display.artikel.beschreibung_headline') }}
Application:
The locking unit is used to firmly hold the round stock (chromium-plated steel, stainless steel) such as piston rods, guides etc. in the desired position. Special adaptors for cylinders are available. During venting (energy failure), the clamping unit automatically clamps the round stock and releases it (powerless break!) during pressure application.
Materials:
Body: anodized aluminium, clamp jaws: brass, piston: POM, spring: spring steel, seals: NBR / PUR
Temperature range:
-20 to +80 °C
Operating pressure:
4 to 10 bar
Scope of delivery:
Locking unit is delivered including fastening screws
Advantages:
•short response time and high switching frequency possible,
•long service life,
•exactly reproducible positioning thanks to exact guidance of the jaws in the housing,
•due to the use of special brass extremely low wear on jaws and the rod,
•automatic, safe break in the event of energy failure (powerless break!)
Warning:
The locking unit should not be used as a safety device!
Warning:
When using pneumatic cylinders, the locking unit should be opened only if equilibrium of forces prevails at the piston, otherwise the backward movement of the piston rod could lead to an accident. Shutting off the supply of compressed air on both the sides (e.g. using a 5/3-way valve, centre position shut off) guarantees no safety! In many cases a 5/3-way valve can cause breathing in the centre position. Please ask us in individual cases.
The locking unit is used to firmly hold the round stock (chromium-plated steel, stainless steel) such as piston rods, guides etc. in the desired position. Special adaptors for cylinders are available. During venting (energy failure), the clamping unit automatically clamps the round stock and releases it (powerless break!) during pressure application.
Materials:
Body: anodized aluminium, clamp jaws: brass, piston: POM, spring: spring steel, seals: NBR / PUR
Temperature range:
-20 to +80 °C
Operating pressure:
4 to 10 bar
Scope of delivery:
Locking unit is delivered including fastening screws
Advantages:
•short response time and high switching frequency possible,
•long service life,
•exactly reproducible positioning thanks to exact guidance of the jaws in the housing,
•due to the use of special brass extremely low wear on jaws and the rod,
•automatic, safe break in the event of energy failure (powerless break!)
Warning:
The locking unit should not be used as a safety device!
Warning:
When using pneumatic cylinders, the locking unit should be opened only if equilibrium of forces prevails at the piston, otherwise the backward movement of the piston rod could lead to an accident. Shutting off the supply of compressed air on both the sides (e.g. using a 5/3-way valve, centre position shut off) guarantees no safety! In many cases a 5/3-way valve can cause breathing in the centre position. Please ask us in individual cases.
{{ $t('shop.display.artikel.eigenschaften_headline') }}
| Version | Complete locking unit |
| Piston diameter [mm] | 63 |
| Piston rod diameter (f8 / h9) [mm] | 20 |
| Retention force (static) [N] | 2.200 |
| Requires cylinder piston rod extension [mm] | 60 |
| A1 [mm] | 56,5 |
| A2 [mm] | 55 |
| A3 [mm] | 7,5 |
| A4 [mm] | 32 |
| B [mm] | 82 |
| C [mm] | 85 |
| D1 [mm] | 45 |
| D2 [mm] | 38 |
| D4 [mm] | 8,5 |
| F [mm] | 42,5 |
| G1 | M 8 |
| G2 | M 8 |
| L1 [mm] | 15 |
| L2 [mm] | 40 |
| L3 [mm] | 15 |
| L5 [mm] | 70 |
| L6 [mm] | 82 |
| L7 [mm] | 49,0 |
| L8 [mm] | 21,0 |
| L9 [mm] | 29,5 |
| L10 [mm] | 12 |
{{ $t('shop.display.artikel.info') }} XL63BREMS
| {{ $t('shop.all.gewicht') }} | 1,1 kg / pcs |
| {{ $t('shop.all.gtin') }} | 4050571799601 |
| {{ $t('shop.display.artikel.zollwarennummer') }} | 84123100 |
{{ $t('shop.all.dokumente') }}
- {{ $t('shop.display.datenblatt.titel') }} ({{ $t('shop.all.englisch') }}) (Print view)
Catalogue page Atlas 9 (Page 843) atlas9_seiten/843.pdf
Documentation doku/xl_brems.pdf
3D CAD file (volume model) protected/cad/3d/72703/xl63brems49277.stp
Documentation doku/xl_brems.pdf
3D CAD file (volume model) protected/cad/3d/72703/xl63brems49277.stp
{{ $t('shop.all.unverbindliche_richtwerte') }}
Accessories
Payment options:
{{ $t('shop.all.wochenendversand.hinweis') }}
An error has occurred!
An error has occurred, please reload this page and try again.