€888.14 incl. VAT
pcs
Item description
Suitable:
NG 6 intermediate plate valves are used in combination with NG 6 directional valves. The intermediate plate valves are fitted between the directional valves and the connection plate. Each intermediate plate has a specific function, they control the strength, movement and speed of a hydraulic cylinder or a hydraulic motor.

Materials:
Body: Spheroidal cast iron, internal parts: Steel, seals: NBR

Media:
Hydraulic oils on the basis of mineral oil (viscosity: Bosch Rexroth: 10 - 500 mm²/s, alternatively: 20 - 400 mm²/s)

Operating pressure:
0 - 315 bar (alternatively: 0 - 320 bar)

Nominal flow:
up to approx. 60 l/min depending on the valve used (request pressure loss curves if required), we recommend usage up to approx. 40 l/min

Note:
The connection pattern NG 6 is standardised in accordance with DIN 24340-A6 / ISO 4401-03 (NG 6) / CETOP R 35 H-03 and NFPA-D03. The valves must be attached with screws of strength class 12.9.

Scope of delivery:
Valve including seals, without screws.
Properties
Ver­sion Bosch-​Rexroth
func­tion pres­sure lim­it­ing valve
af­fected flow rate A -> B & B -> A
Pres­sure stage [bar] 0 - 315
Clamp­ing length [mm] 40
Tem­per­a­ture range [°C] -20 to +80
Further information on ZDB6VD2-4X/315V
Weight 1,4 kg / pcs
GTIN 4050571809805
Customs duty number 84812010
RoHS compliant Yes
Manufacturer Bosch-Rexroth
Documents
*our operating recommendation, **the one-way flow control can be changed by rotating, ***Seals from FKM

 
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Immediately available
Payment options:

Cash on delivery

Invoice