{{ $t('shop.all.spaetbestellservice.hinweis') }}
Position drive dimensions | 0720 |
Flange drilling screen | F14 |
Swivel angle [deg] | 90 |
Adjustable range end position at 0° [deg] | -1 to 9 |
Shaft connection Depth [mm] | 38,5 |
Standard connection to fitting | ISO 5211 |
Dampening | No dampening |
installation position | arbitrary |
Principle of operation | single action |
Construction set up | Joch kinematics |
Position detection | without |
Closing direction | Right closing |
Valve connection corresponds to standard | VDI/VDE 3845 (NAMUR) |
Safety Integrity Level (SIL) |
Product can be used in SRP/CS up to SIL 2 Low Demand, Product can be used in SRP/CS up to SIL 2 High Demand |
Operating pressure [bar] | 4.2 to 8.4 |
Nominal operating pressure [bar] | 5,6 |
CE certificate (see declaration of conformity) | to EU EX protection directive (ATEX) |
ATEX gas category | II 2G |
ATEX dust category | II 2D |
Ex ignition protection type gas | Ex h IIC T6...T3 Gb X |
Ex ignition protection type dust | Ex h IIIC T85°C...T200°C Db X |
Ex ambient temperature | -50°C <= Ta <= +60°C |
Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
Information about operating and control medium | Oiled operation possible (required in further operations) |
Corrosion resistant class KBK | 3 - severe corrosion stress |
ambient temperature [°C] | -50 to 60 |
Rotary torque for nominal operating pressure and 0° pivot angle [Nm] | 840,0 |
Rotary torque for nominal operating pressure and 50° pivot angle [Nm] | 450,0 |
Rotary torque for nominal operating pressure and 90° pivot angle [Nm] | 660,0 |
Information about torque | The operating torque of the actuator may not be higher than the maximum permitted torque listed in ISO 5211, related to the size of the fastening flange and the coupling. |
Air consumption a 6 bar per cycle 0°-90°-0° [LTR] | 29,40 |
Product weight [g] | 33.000 |
Shaft connection | T36 |
Pneumatic connection | G1/4 |
Material information |
LABS containing materials included, RoHs compliant |
Cover material | Aluminium wrought alloy |
Seals material |
FVMQ, PTFE reinforced |
Housing material | Aluminium wrought alloy |
Screws material | High-alloyed steel |
Shaft material | High-alloyed steel |
Material number shaft | 1.4305 |
Adjustable range end position at 90° [deg] | 81 to 91 |
Information about the adjustment range of the end positions | Selectively one end position is adjustable |
Connection pressure for spring strength [bar] | 4,2 |
Spring force torque at a swivel angle 0° [Nm] | 360,0 |
Spring force torque at a swivel angle 50° [Nm] | 270,0 |
Spring force torque at 90° [Nm] | 540,0 |
Spring strength | 3 |
{{ $t('shop.all.gtin') }} | 4052568196011 |
{{ $t('shop.display.artikel.zollwarennummer') }} | 84123900 |
{{ $t('shop.all.hersteller') }} | Festo |
{{ $t('shop.all.spaetbestellservice.hinweis') }}
{{ $t('shop.all.wochenendversand.hinweis') }}
Der opstod en fejl. Indlæs denne side igen og prøv én gang til.