Valve function |
3/2 closed monostable
|
Actuation type |
Electrical
|
Build.width [mm] |
15
|
Normal nominal flow [l/min] |
18
|
Operating pressure [bar] |
0 to 10
|
Reset mode |
Mechanical spring
|
Protection category |
IP65
|
Sealing principle |
Soft
|
installation position |
arbitrary
|
Complies to standard |
ISO 15218
|
Hand assist actuation |
tentative
|
Control type |
Direct
|
Flow direction |
Not reversible
|
Überdeckung |
negative Überdeckung
|
Shifting time off [ms] |
6
|
Shifting time on [ms] |
6
|
Power-on time |
100 %
|
Coil characteristic value |
230 V AC: 50/60 Hz, pull-in power 2.9 VA, holding power 2.1 VA
|
Permitted voltage oscillations |
-15 % / +10 %
|
Operating medium |
Compressed air to ISO 8573-1:2010 [7:4:4]
|
Information about operating and control medium |
Oiled operation possible (required in further operations)
|
Corrosion resistant class KBK |
2 - moderate corrosion stress
|
Medium temperature [°C] |
-10 to 50
|
ambient temperature [°C] |
-10 to 50
|
Electrical connection |
Wiring diagram Form C acc. to EN 175301-803, acc. to DIN EN 175301-803
|
Pneumatic connection 1 |
Connection plate
|
Pneumatic connection 2 |
Connection plate
|
Pneumatic connection 3 |
Connection plate
|
Material information |
RoHs compliant
|
Seals material |
NBR
|
CE certificate (see declaration of conformity) |
to EU low voltage directive
|
Information about force dynamic sampling |
Switching frequency at least 1x per week
|
Oscillation strength |
Transport use test with severity level 2 to FN 942017-4 and EN 60068-2-6
|
Shock resistance |
Shock test with degree of severity 2 to FN 942017-5 and EN 60068-2-27
|