1 312,00 € vč. DPH
ks
Popis artiklu
Použití:
Wherever a high measurement accuracy along with a high overpressure safety and sturdiness is required. For example, for pressure and tightness test, setting of pressure switches, or for calibration of pressure gauges (using hand pump HP 40).

Materiály:
Housing: Plastic, connection: 1.4404, sensor: Piezo (>=10 bar: 1.4404)

Indikace:
5-digit LCD display, height of digits: 14,5 mm

Pripojovací závit:
G 1/4" * (optional: G 1/2" *)

Teplotní rozsah:
Prostredí: -10 az +50 °C, médium: -20 az +50 °C

Presnost (IEC 61298-2):
± 0.5% of the range (optional: ± 0.25% of the range)

Míra zmeny:
max. 10 measurements / second (adjustable)

Automatický vypínací cas:
15 minutes (or permanent operation)

Elektrické napájení:
3x Mignon batteries AA (enclosed, service life approx. 4000 hours without backlighting or Bluetooth) or via micro-USB port type B (mains unit and USB charging cable not enclosed)

Stupen krytí:
IP 65

Opce:
Connection thread G1/2“* -G12, data logger for recording of up to 1 M data points (can also be enabled subsequently via an enabling code. This requires the serial number of your device) -DL, wireless data transmission by Bluetooth -BT, accuracy ± 0.25% of the range -0.25, DAkkS-DKD calibration (according to DKD-R 6-1, retraceable and accredited according to DIN EN ISO / IEC 17025, decision rule 4), certificate 3.1

Výhody:
•Simple data transfer via micro-USB type B or by optional Bluetooth interface, app available free of charge on WIKA website www.wika.com (CPG 1200),
•Reliable solution also for stationary operation thanks to power supply via USB interface,
•Peak display and storage,
•Visual alarm when exceeding or undercutting pre-set thresholds,
•Media temperature display


Upozornení:
WIKA typ CPG1200
vlastnosti
pro­ve­dení G 1/4", 0.25% accu­racy
roz­sah zob­ra­zení 0 - 10
pri­po­jo­vací závit G 1/4"
Za­jiš­těný pro­ti­pře­tlaku 0 - 20
Housing pro­tection cap DMB SK
Plas­tic case for sto­rage & trans­port DMB KO
Další informace k DMB10ES-0,25
Celní číslo zboží 90262040
výrobce WIKA (WEEE DE92770372)
Dokumenty
*se stredícím cepem pro profilový tesnící kroužek

 
Všechny údaje se rozumějí jako nezávazné směrné hodnoty! Za výběr údajů nepotvrzených písemně nepřebíráme žádnou záruku. Údaje o tlaku se vztahují, pokud není uvedeno jinak, ke kapalinám skupiny II při +20°C.
Není na skladě
Možnosti zaplacení:

Příjmení

Faktura

Víkendová zásilka

Objednejte jednoduše o víkendu do neděle 15:00 hodin (nebo když je pondělí svátek, do pondělí 15:00 hodin) a zboží obdržíte v rámci Německa prostřednictvím GLS další pracovní den před 12:00 hodinou (poplatek: 5%, min. 30,00 €).