{{ $t('shop.all.spaetbestellservice.hinweis') }}
Fastening type |
on connection plate, Permanently screwed |
Product weight [g] | 2.100 |
Display | Seven segment display |
Permission |
RCM mark, c UL us - Listed (OL) |
CE certificate (see declaration of conformity) |
acc. to EU-EMV Directive, acc. to EU Machine Directive, acc. to EU Low voltage Directive, acc. to EU-RoHS Directive |
Bearing temperature [°C] | -25 to 70 |
ambient temperature [°C] | 0 to 40 |
Relative humidity | 0 - 90 % |
Protection category |
IP10, IP20 |
Degree of contamination | 2 |
Material information |
LABS containing materials included, RoHs compliant |
Phase nominal operating voltage | 1-phase |
Nominal operating voltage AC [V] | 230 |
Permitted voltage oscillations | ± 10 % |
Network frequency [Hz] | 50 to 60 |
Nominal current [A] | 2 to 3 |
Network filter | integrated |
Max. intermediate circuit voltage DC [V] | 320 |
Braking resistance [Ohm] | 60 |
Impulse power braking resistance [kVA] | 2,8 |
Nominal voltage logic supply DC [V] | 24 |
Permitted range logic voltage | ± 20 % |
Power input logic supply without parking brake [A] | 0,55 |
Output voltage range AC | 3x 0 - 270 V |
Nominal output current [A] | 2,5 |
Nominal current per phase, effective [A] | 2,5 |
Peak current per phase, effective [A] | 5 |
Max. peak current duration [s] | 5 |
Nominal performance controller [VA] | 500 |
Peak performance [VA] | 1.000 |
Output frequency [Hz] | 0 to 1000 |
Parameterising interface |
USB, Ethernet, Parameterising and commissioning |
Fieldbus coupling |
CANopen, Modbus/TCP |
Communication profile | DS301/DSP402 |
Process coupling |
I/O coupling, for 256 mobile sets |
Max. fieldbus transfer rate [Mbit/s] | 1 |
Bus connector |
Sub-D, 9 pin, socket / container / …. |
Encoder output interface, properties | Resolution 16384 ppr |
Encoder output interface, function |
Actual value feedback via encoder signals for speed control mode, Target value for downstream switched slave actuator |
Encoder input interface, properties |
EnDat, HIPERFACE, RS422, SINCOS, 3 phase encoder signals |
Encoder input interface, function |
In synchronous mode as a speed preset of the slave actuator, Encoder signal target speed value |
Quantity digital logic inputs | 10 |
Properties logic inputs |
Freely configurable, Galvanically separated |
Work area logic input [V] | 8 to 30 |
Quantity digital logic outputs 24 V DC | 5 |
Properties digital logic outputs |
Galvanically separated, Partially freely configurable |
Max. current digital logic outputs [mA] | 100 |
Quantity analogue target value inputs | 2 |
Properties target value inputs |
Differential inputs, Configurable for speed, Configurable for current |
Work area target value input | ± 10 V |
Impedance target value input [kOhm] | 20 |
Quantity analogue monitor outputs | 2 |
Work area monitor outputs | ± 10 V |
Resolution monitor outputs [Bit] | 9 |
Properties monitor outputs | Short circuit proof |
Certified awarding point |
01/205/5162.02/19, TÜV Rheinland |
Active PFC | yes |
Safety function |
Safe switched off torque (STO), Safe stop 1 (SS1) |
Safety Integrity Level (SIL) | Safe switched off torque (STO) / SIL 3 / SILCL 3 |
Performance Level (PL) | Safe switched off torque (STO) / category 4 performance level e |
Diagnose degree of coverage [%] | 97 |
SFF Safe Failure Fraction [%] | 99,17 |
Hardware error tolerance | 1 |
Proof test interval [A] | 20 |
{{ $t('shop.all.gewicht') }} | 2.100 g / ks |
{{ $t('shop.all.gtin') }} | 4052568243241 |
{{ $t('shop.display.artikel.zollwarennummer') }} | 85044085 |
{{ $t('shop.all.hersteller') }} | Festo |
{{ $t('shop.all.spaetbestellservice.hinweis') }}
{{ $t('shop.all.wochenendversand.hinweis') }}
Vyskytla se chyba, načtěte tuto stranu prosím znovu a pokuste se o to znovu.